Loading ...
Loading ...
SENSOR INFORMATION
TEST
NOTE
• Turn the TIME knob anti-clockwise on the minimum. Turn the LUX knob clockwise on the maxi-
mum (sun).
• Switch on the power; the lamp will have no signal at the beginning. Aer Warm-up 30sec, the
lamp can start work .If it receives the induction signal, the lamp will turn on. While there is no
another induction signal any more, the lamp should stop working within 10sec±3sec.
• Turn LUX knob anti-clockwise on the minimum (moon). If the ambient light is more than 3LUX,
the lamp should not work. If the ambient light is less than 3LUX (darkness), the sensor would
work. Under no induction signal condition, the lamp should stop working within 10sec±3sec.
• Should be installed by electrician or experienced person.
• Avoid installing it on the uneven object.
• There should be no hindrance and moving objects in front of the detection windows to aect
detection.
• Avoid installing it near air temperature alteration zones such as air condition, central heating, etc.
• Considering your safety, please do not open the cover when you find the hitch aer installation.
Height of installation:1.8-2.5m Detection Distance: Max.9m
Note: when testing in daylight, please turn LUX knob to ☼ (SUN) position, otherwise the
sensor lamp could not work!
Loading ...