Loading ...
Loading ...
Loading ...
ASSEMBLY INSTRUCTIONS
11
STEP 10
NOTE: The RIGHT PEDAL(32) has R stamped on the end of the pedal shaft. The RIGHT PEDAL(32) has
right hand threads and is tightened by turning clockwise. The LEFT PEDAL(31) has L stamped on the end
of the pedal shaft. The LEFT PEDAL(31) has left hand threads and is tightened by turning counterclockwise.
Thread the RIGHT PEDAL(32) to the RIGHT CRANK(34) as shown. Tighten the pedal securely. The
shoulder of the PEDALS(31, 32) should be in contact with the CRANKS(33, 34) when securely tightened.
Repeat on the left side in order to attach the LEFT PEDAL(31) to the LEFT CRANK(33).
STEP 11
Install two AA batteries into the METER(14), the batteries are not included. See page 13 for detailed battery
installation instructions. Plug the SENSOR WIRE(82) into the connecting wire on the METER(14), and push
the excess wires back into the MAIN FRAME(1). Slide the METER(14) onto the METER BRACKET(8).
NOTE: Be careful not to damage the wires when attaching the METER(14).
Shoulder
Shoulder
Loading ...
Loading ...
Loading ...