Loading ...
Loading ...
Loading ...
Adjusting the Motion-Control Lever Tilt
Adjust the motion-control levers forward or rearward for your comfort.
G439363
1. Loosen the knob.
2. Pivot the control lever forward or rearward.
3. Tighten the knob.
4. Repeat the adjustment for the other control
lever.
During Operation
During Operation Safety
• The owner/operator can prevent and is responsible for accidents that may cause
personal injury or property damage.
• Use your full attention while operating the machine. Do not engage in any activity that
causes distractions; otherwise, injury or property damage may occur.
• Do not operate the machine while ill, tired, or under the influence of alcohol or drugs.
• Do not operate the machine unless all guards and safety devices, such as the deflectors
and the entire grass catcher, are in place and functioning properly. Replace worn or
deteriorated parts with genuine Toro parts when necessary.
• Operating engine parts, especially the muffler, can become extremely hot. Severe burns
can occur on contact and debris, such as leaves, grass, brush, etc. can catch fire. Keep
the engine area free from debris and excessive oil and grease.
• Operate the engine only in well-ventilated areas. Exhaust gases contain carbon
monoxide, which is lethal if inhaled.
• Operate the machine only in good visibility and appropriate weather conditions. Do not
operate the machine when there is the risk of lightning.
• Start the engine with your feet well away from the blades.
• Keep your hands and feet away from moving parts. Keep clear of the discharge opening.
• Keep away from holes, ruts, bumps, rocks, and other hazards. Use care when
approaching blind corners, shrubs, trees, tall grass or other objects that may hide
obstacles or obscure your view.
• Do not mow with the discharge deflector raised, removed, or altered unless there is a
grass-collection system or mulch kit in place and working properly.
3464-625A Page 4–7 Operation: Before Operation
Loading ...
Loading ...
Loading ...