Loading ...
Loading ...
Loading ...
LED Multi-Media Display User Manual
10
Caution
The password strength of the device can be automatically checked. We highly recommend you
change the password of your own choosing (using a minimum of 8 characters, including at least
three kinds of following categories: upper case letters, lower case letters, numbers, and special
characters) in order to increase the security of your product. And we recommend you change
your password regularly, especially in the high security system, changing the password monthly
or weekly can better protect your product.
Proper configuration of all passwords and other security settings is the responsibility of the
service provider and/or end-user.
6. On Add Device interface, click and select the edited template file.
7. Click OK.
2.3 Import Configuration File
Import the receiving card configuration file.
Before You Start
Get the receiving card configuration file and save it to the PC running the client.
Steps
1. Go to LED Settings → Maintenance → System Maintenance → Import/Export → Import.
2. Check the device(s) to be set from the device list.
3. Click after Import Configuration File to select the configuration file saved in the PC.
4. Click Import.
5. Enter Password, and click OK.
Note
The password is the set password when exporting the configuration file.
2.4 Set Display Attribute
You can set the parameters such as video wall scale, screen resolution, etc.
Steps
1. Go to LED Settings → Screen Control → Signal Connection → Display Attribute Configuration.
2. Select the device to be set from the device list.
Loading ...
Loading ...
Loading ...