Loading ...
Loading ...
Loading ...
13
o
peraTion
Figure 9
= Drop symbol reset
After the water filter has been
changed the drop symbol on the
display must be reset.
How to reset the drop symbol
• Activate the setup mode by touching the SuperFrost
icon for 5 seconds.
• Touch the freezer compartment Down icon until
appears in the freezer temperature display.
• Touch the SuperFrost icon
- the display shows
• Touch the SuperFrost icon again
- the display shows
• The drop symbol disappears.
• Exit setup mode by touching the freezer compartment
On/Off icon.
= Ice maker function test
Activation by service personnel only.
Freezer On/Off icon
Freezer compartment Up/Down icons
SuperFrost icon
Child lock LED
= Water quantity for ice maker
If the ice cubes produced by the ice maker are too
small, the inflowing water quantity can be adjusted.
How to adjust the water quantity
• Activate the setup mode by touching the SuperFrost
icon for 5 seconds.
• Touch the freezer compartment Down icon until
appears in the freezer temperature display.
• Touch the SuperFrost icon
- the display shows
• Touch the freezer compartment Up icon
once only so E 4 appears in the display.
IMPORTANT
Do not increase for more than one step. If the
adjusted value is too high, the ice cube tray of the
ice maker could overflow.
• Touch the SuperFrost icon again.
• Exit setup mode by touching the freezer compartment
On/Off icon.
Check the ice cube size within the next days. If the ice
cubes are still smaller than desired, follow the steps
above again.
Loading ...
Loading ...
Loading ...