Loading ...
Loading ...
Loading ...
21
Rotate the control knob to control the hob. The
current power level of a zone is displayed on the
display of the hob.
The control knob locks into position after rotating. The
control knob rotates back automatically if the knob is
rotated to one of the two overwinding positions.
The control knob has 14 positions:
∙ Overwinding to the left (OWL) special function:
Heat up time automatic
∙ Off
∙ Melting Function
∙ Warming Function
∙ Power levels (1-9)
∙ Overwinding to the right (OWR) special function:
Power boost
BASIC HOB FUNCTION
Activating a cook zone
Rotate the control knob to a power level to activate a
cooking zone.
Turning off individual cooking zones
Rotate the control knob to zero to turn off an
individual cooking zone.
Adjusting of power levels
Rotate the control knob anticlockwise to increase
the power of a zone. Rotate the control knob back
clockwise to decrease the power of a zone.
FUNCTIONS
Idle mode
In Idle mode all displays are dark, except if there is
residual heat present.
Rotate one of the control knobs to leave Idle mode. If a
buzzer is available, a sound is played.
The display disappears after 15 seconds when the
control knobs are all rotated to zero. If a buzzer is
available, a sound is played.
Heat up time automatic
The heat up time automatic is a function that boosts
the power of a cooking zone before reaching the set
power level.
Rotate the control knob to the left overwind position
and hold for 2 seconds. Within the next 10 seconds,
rotate the control knob to the desired power level.
The display alternates between the “A” symbol and the
selected power level.
4
The heat up time automatic function is
not available in level 0, level 9, melting
function, warming function and the
power boost.
Melting Function
The melting function heats the bottom of the pan to
45°C.
Rotate the control knob to the melting function. The
display shows the “u” symbol.
4
The melting function can be used for 2
hours continuously.
Warming Function
The warming function heats the bottom of the pan to
70°C.
Rotate the control knob to the warming function. The
display shows the “u” symbol.
4
The warming function can be used for 2
hours continuously.
Power Boost
The power boost is a function that temporarily boosts
the power to a cooking zone.
Rotate the control knob to the right overwind position.
The display shows the “P” symbol.
4
After 10 minutes the power boost is
automatically switched off.
Loading ...
Loading ...
Loading ...