DW60CG550FSREU User Manual

Loading ...

English54

Before you start

Rinse aid level setting

You can change the amount of rinse aid applied during a cycle.

1. Press the Delay Start button to select the rinse aid level setting menu.

- The display shows the current setting. (Default setting: “F4”)

2. Press the AUTO (DW60CG5**B****/DW60CG5**I**** model) or Program (DW60CG5**F****/

DW60CG5**U****/DW60CG5**S**** model) cycle button to change the setting.

- You can select from F1 - F5 (minimum – maximum).

3. Wait 5 seconds to save the setting.

Water hardness level setting

You can change the water hardness level according to water hardness in your local area.

Changing this setting will have effect on the salt consumption in the dishwasher’s salt

storage.

1. Press the Self Clean (DW60CG5**B****/DW60CG5**I**** model) or Sanitize

(DW60CG5**F****/DW60CG5**U****/DW60CG5**S**** model) button to select the water

hardness level setting menu.

- The display shows the current setting. (Default setting: “H3”)

2. Press the AUTO (DW60CG5**B****/DW60CG5**I**** model) or Program (DW60CG5**F****/

DW60CG5**U****/DW60CG5**S**** model) cycle button to change the setting.

- You can select from H1 – H6 (soft – hard).

3. Wait 5 seconds to save the setting.

NOTE

• Change the setting according to the table in the “Adjusting salt consumption” section on

page 59.

• Default Setting: H3

• The dishwasher regenerates the water softener once every 3–4 cycles depending on the

setting. However, the dishwasher will regenerate the water softener on the rst cycle

after you change the setting.

• Regeneration will be operated in dry phase with an additional 2.0–2.5 l of water being

used and 4–10 minutes taken for the cycle.

• The energy used may be increased however this should be by an insignicant amount.

Europe_DW6500AM_WEB_DW0004_English.indd 54 2023-07-20  7:02:40

Loading ...

Samsung Series 7 Dw60cg550fsreu Freestanding 60cm Dishwasher With Auto Door, 14 Place Setting