Loading ...
Loading ...
Loading ...
Page 35
Note: The pump was lled with oil at the factory. The preferred oil is CAT or SIMPSON
®
Premium Pump Crankcase Oil. If this oil is not available, an SAE 15W-40 oil may be used.
Change the oil after the rst 50 hours of operation and every 100 hours thereafter or every
3 months.
Pump Maintenance
1. Oil sight glass
2. Oil ll plug / vent cap
3. Oil drain plug
1. Loosen the pump oil ll plug / vent cap.
2. Place a container under the oil drain plug.
3. Remove the oil drain plug.
4. After the oil has drained, insert the oil drain plug; tighten securely.
5. Rell with CAT or SIMPSON
®
Premium Pump Crankcase Oil. If these oils are not
available, an SAE 15W-40 oil may be used.
6. Make sure the oil level meets but does not exceed the dot in the center of the sightglass.
7. Insert the oil ll plug; tighten securely.
How to change the pump oil
3. Turn the tank valve on for a few seconds
to ush any debris out of the hose line from
the tank.
4. Thread the housing cover into the bottom
of the water lter housing; hand tighten.
2
3
1
Loading ...
Loading ...
Loading ...