Loading ...
Loading ...
Loading ...
2. Remove debris from inside and outside of the screen guard.
3. After cleaning, secure screen guard in place with four screws.
SB31882,00003F1-19-26AUG20
Cleaning Engine Shroud
CAUTION: Avoid injury! Compressed air can cause debris to
y a long distance.
• Clear work area of bystanders.
• Wear eye protection when using compressed air for
cleaning purposes.
• Reduce compressed air pressure to 210 kPa (2.1 bar) (30
psi).
IMPORTANT: Avoid damage! An obstructed air intake screen can
cause engine damage due to overheating. Keep air intake
screens and other external surfaces of the engine, including
cooling ns, clean at all times to allow adequate air intake.
CAUTION: Avoid injury! Touching hot surfaces can burn
skin. The engine, components, and uids are hot if the
engine has been running. Allow the engine to cool before
servicing or working near the engine and components.
Z515E
1. Park machine safely. (See Parking Safely in the Safety Section.)
2. Clean the air intake screen and external engine surfaces.
3. Locate the rotating screen guard (A) at the top of the engine, and
the two retaining tabs (B), embossed with a nger symbol.
Remove the screw at the front of the screen guard (if equipped).
GXT002522—UN—17SEP15
4. Push in on two retaining tabs and lift o guard (A).
5. Clean guard and ywheel cover of debris.
IMPORTANT: Be careful to maintain position of fuel pump
assembly (D) and clips (E), and fuel line. Also any other
attached components when removing parts from side of
engine.
6. Remove bolts and engine shroud (C).
7. Remove four bolts and rotating screen (F).
MXAL47082—UN—16APR13
8. Clean debris from:
● Fan areas (G)
● Cylinder head cooling ns (H)
● Engine cooling ns
● Area between engine and frame
9. Install rotating screen with four bolts.
IMPORTANT: Engine shroud must be assembled so that slots in
the shroud align with the ridge in the air intake and mating
surfaces along the sides of the engine. Failure to assemble
correctly will prevent the air lter from sealing and cause
engine damage.
10. Install shroud and hardware.
Z530M and Z530R
1. Park machine safely. (See Parking Safely in the Safety Section.)
2. Clean the external engine surfaces.
3. Lift air cleaner cover and remove air cleaner element. (See
Checking and Cleaning Air Filter Element.)
MX101434—UN—24APR20
4. Remove three screws (B) and ywheel screen (A) from engine.
5. Clean debris from ywheel area.
Service Engine
35
Loading ...
Loading ...
Loading ...