Loading ...
Loading ...
Loading ...
INSTALLATION
APPLIANCE INSTALLATION
UNPACKING THE RANGE
• Remove all packing materials from the shipping pallet
but leave the adhesive-backed foam layer over brushed-
metal surfaces to protect it from scratches until the
range is installed in its final position. Only the film on the
side panels should be removed before inserting the
range between the cabinets.
• Examine the appliance after unpacking it. In the event of
transport damage, do not plug it. Take pictures of the
damage and report it immediately to the freight forwarder.
• Remove the oven door(s). This will reduce the weight of
the range.
• The grates, griddle plate, burner caps, and oven racks
should be removed to facilitate handling.
• Before moving the range, protect the floor to prevent
damage.
REMOVING THE OVEN DOOR
Prepare the door for removal. Flip up the locking clamps on
each door hinge. Slowly shut the door until the protruding
clamps stop the movement.
Pull oven door upwards and remove.
Do not lift or carry the oven door by its handle!
This may damage the hinges.
Fig. 10
21
Loading ...
Loading ...
Loading ...