Loading ...
Loading ...
Loading ...
ASSEMBLY INSTRUCTIONS
STEP 1: Position the Wheels in the WHEEL CAPS(38) on the FRONT STABILIZER(3) facing the
front. Attach the FRONT STABILIZER(3) to the front of the FRONT FRAME(1) with CARRIAGE BOLTS
(M8x1.25x60mm)(49), ARC WASHERS(M8)(46), LOCK WASHERS(M8)(71), and ACORN NUTS(M8x1.25)
(50).
STEP 2: Screw the STAND(75) to the bottom of the REAR FRAME(64). Connect the REAR FRAME(64)
to the FRONT FRAME(1) with SOCKET HEAD BOLTS(M8x1.25x15mm)(69), LOCK WASHERS(M8)(71),
and WASHERS(M8mm)(59).
STEP 3: Attach the REAR STABILIZER(6) to the back of the REAR FRAME(64) with CARRIAGE
BOLTS(M8x1.25x60mm)(49), ARC WASHERS(M8)(46), LOCK WASHERS(M8)(71), and ACORN
NUTS(M8x1.25)(50).
NOTE: You can adjust the LEVELING CAPS(39) on the REAR STABILIZER(6) to keep the Recumbent
Bike stable.
8
Place all parts from the box in a cleared area and position them on the oor in front of you. Remove
all packing materials from your area and place them back into the box. Do not dispose of the packing
materials until assembly is completed. Read each step carefully before beginning. If you are missing
a part, please go to staminaproducts.com under the Customer Care section and order the part
(in the U.S.). Our Customer Care Sta is available to assist you from 7:30 A.M. to 5:00 P.M. (Central
Time) Monday through Thursday and 8:00 A.M. to 3:00 P.M. (Central Time) on Friday.
Some product parts are t tested at the factory to ensure proper t and alignment. Marks in
the paint may be noticeable, but are not an indication of damage.
50
46
49
3
71
38
38
1
59
71
69
59
71
69
46
71
50
46
71
50
75
39
49
6
39
64
Loading ...
Loading ...
Loading ...