Loading ...
Loading ...
Loading ...
Page 10
5. Cleaning & Maintenance
Endure the baes are cool before removing, to
ensure no oil is spilt.
To remove the lter lift up the lever and pull
towards you. Then lower the lter to remove
from the cavity. To replace, perform the same
operation but in reverse.
Baes
For this appliance to function eectively, regular maintenance is a must.
The function of the bae is to collect the grease particles given o during cooking.
Clogged heavy oil deposits restrict airow and may cause the motor to overheat
and become a re hazard.
Baes should be cleaned every 3-6 weeks or after 40 hours of use.
For induction cooktop, please aim to clean them at least every 10 days, depending on use.
The baes can be washed by hand or in the dishwasher.
Washing by hand - Immerse the lter in hot water and a suitable detergent and when clean,
rinse with plenty of hot water.
Dishwasher - Put the lter in the dishwasher and select a short program at low temperature.
NOTE: The colour of the metal mesh lters may change after several washes. This is normal and
it is not necessary to change the lters.
Please ensure the baes are completely dry before placing them back in position
and operating the rangehood.
Warning
If the baes are very dirty, the motor will extract only a small quantity of air, which
reduces its eciency;
The grease deposits that build up on the baes are highly ammable and COULD
EASILY CATCH FIRE.
The manufacturer is exonerated from all responsibility in the event of re due to poor
maintenance of the grease lters.
Loading ...
Loading ...
Loading ...