Loading ...
Loading ...
Loading ...
§
It is recommended that you do not install the appliance near an oven, radiator or other heating source. Direct
sunlight may affect the acrylic coating and heat sources may increase electrical consumption. Don’t install in
a location where the temperature will fall below 60°F (16°C). For best performance, do not install the
appliance behind a cabinet door or block the base grille.
§
Avoid locating the unit in moist areas.
§
Plug the beverage cooler into an exclusive, properly installed-grounded wall outlet.
INSTALLING THE STAINLESS STEEL HANDLE
This wine cooler includes a stainless handle that is not required to operate this unit. To install the handle
please follow the below instructions:
① Pull away the door gasket in the area where the handle is to be
installed. You can see two designated holes for handle installation.
The gasket is easily displaced by hand, no tools are necessary.
② Install the handle tightly as shown below with the two screws, lock
washers and flat washers provided. (DO NOT over tighten as this will
cause damage to the handle assembly and stainless steel surface of
the glass door).
③ Replace the door gasket to its original position.
OPERATING YOUR WINE COOLER
The controls of your wine cooler
POWER OFF/ON
To control this appliance, turn on/off. To turn OFF the appliance, touch the and marks at the same time
for 5 seconds.
SET
To set or view the internal temperature setting for each zone.
LIGHT
To control the inner light, turn on/off.
9
Loading ...
Loading ...
Loading ...