Loading ...
Loading ...
8
Specication
7
Operation Caution and Device Maintenance
- All the electronic operation should be strictly compliance with the electrical safety regulations, re prevention
regulations and other related regulations in your local region.
- Do not drop the device or subject it to physical shock, and do not expose it to high electromagnetism radiation.
Avoid the equipment installation on vibrations surface or places subject to shock (ignorance can cause equipment
damage).
- Please make sure that the power has been disconnected before you wire, install or dismantle the device.
- If smoke, odors or noise rise from the device, turn o the power at once and unplug the power cable, and then
please contact the service center.
- Do not drop the device or subject it to physical shock, and do not expose it to high electromagnetism radiation.
Avoid the equipment installation on vibrations surface or places subject to shock (ignorance can cause equipment
damage).
- Do not place the device in extremely hot (refer to the specication of the device for the detailed operation
temperature), cold, dusty or damp locations, and do not expose it to high electromagnetic radiation.
- The device for indoor use shall be kept from rain and moisture.
Exposing the equipment to direct sun light, low ventilation or heat source such as heater or radiator is forbidden
(ignorance can cause re danger).
- Do not aim the device at the sun or extra bright places. A blooming or smear may occur otherwise (which is not
a malfunction however), and aecting the endurance of sensor at the same time.
- Improper use or replacement of the battery may result in hazard of explosion. Replace with the same or
equivalent type only. Dispose of used batteries according to the instructions provided by the battery manufactur-
er.
- Do not expose the device to the corrosive gas. Otherwise the equipment damage may occur.
- Do not expose the device to the explosive situation.
One reed switch Yes
External Inputs 2
Tamper protection Front & Back
LED indicator Blue (alarm)
Encapsulated plastic Yes
Input options Normal and Fast Sensitivity with Pulse Count
Programmable pulse count Yes
Fast input sensitivity 1ms
Normal input sensitivity 250ms
Operating temperature -10 °C ot 55 °C (14 °F to 131 °F)
Storage temperature -20 °C ot 60 °C (-4 °F to 140 °F)
Operating humidity 10% to 90%
Weight 59 g
Programming method Advanced Wireless Link
LED indicator On/O
External Input 1 NC/NO, Roller Shutter (RS), Tamper
External Input 2 NC/NO, Roller Shutter (RS), Tamper
RS Pulse Count 2 to 30 Pulses
RS Pulse Count Timeout 10 to 60s
Environment temperature indicator Yes
2-way wireless communication Yes
Transmission frequency 868/433MHz
Frequency hopping Multichannel transmisstion
Transmission encryption AES-128 encryption
Signal strength indicators Yes
RF range WE:1.6 Km/WB:1.2 km(open space)
Enrolling methods Power up, Remote ID, QR code
Battery CR123A x 1 (included)
Standard battery life 5 years
Dimension (H × W × D) 103 mm × 22.5 mm × 23.2 mm
Hangzhou Hikvision Digital Technology CO.,Ltd. No.555 Qianmo Road, Binjiang District, Hangzhou 310052, China