Loading ...
Loading ...
Loading ...
www.SereneLifeHome.com
11
STEP 7:
NOTE: The two upper buckles of Computer (No. 32) should be aligned to the two
upper slots of computer seat of Main Frame (No. 1).
Connect Sensor Wire (No. 34) with the wire of Computer (No. 32). Place Computer
(No. 32) back onto the Main Frame (No. 1), then push the Computer (No. 32)
downwards to t into position. The assembly is complete!
ADJUSTMENTS GUIDE
CAUTION! Moving parts, such as the seat, can crush and cut. Keep hands clear of
the sliding rail during use!
ADJUSTING THE RESISTANCE
Rotate the Tension Control Knob (No. 11) clock-
wise to increase the level of resistance. Rotate the
Tension Control Knob (No. 11) counter-clockwise
to decrease the level of resistance. Tension levels
are set at Level 1 being the lowest and Level 8
being the highest.
32
34
32
34
11
Loading ...
Loading ...
Loading ...