Hikvision IDS-2CD70C5G0-AP User Manual

Loading ...

Network Camera User Manual

Steps

1. Go to TCP/IP settings page: Configuration → Network → Basic Configuration → TCP/IP.

2. Select Wlan to set the parameters. Refer to TCP/IP for detailed configuration.

Note

For stable use of Wi-Fi, it is not recommended to use DHCP.

3. Go to Wi-Fi settings page: Configuration → Network → Advanced Configuration → Wi-Fi.

4. Set and save the parameters.

1) Click Search.

2) Select a SSID, which should be the same as that of wireless router or AP.

The parameters of the network is automatically shown in Wi-Fi.

3) Select the Network Mode as Manage.

4) Input the key to connect the wireless network. The key should be that of the wireless

network connection you set on the router.

What to do next

Go to TCP/IP settings page: Configuration → Network → Basic Configuration → TCP/IP, and click

Wlan to check the IPv4 Address and log in the device. See Login for detailed information.

7.9.2 Connect Wi-Fi Automatically

The device can connect the Wi-Fi automatically via WPS or QSS protocols, which both support PBC

mode and PIN mode.

Use PBC

Set PBC to connect Wi-Fi automatically. PBC refers to the Push-Button-Configuration, in which the

user simply has to push a button, either an actual or virtual one (as the Connect button on the

configuration interface of the IE browser), on both the Access Point (and a registrar of the

network) and the new wireless client device.

Before You Start

The operation should be done within 120 seconds, otherwise the connection will fail.