Loading ...
Loading ...
Loading ...
Network Camera User Manual
58
When the Dial Status turns to Connected, it means a successful dial.
7. Access the device via the IP Address of the computer in the network.
– Input the IP address in the browser to access the device.
– Add the device in client application. Select IP/Domain, and input IP address and other
parameters to access the device.
7.8.2 Set Allowlist
Add the mobile phone number of administrator to the allowlist in order to receive alarm message
from the device.
Steps
1. Go to allow list settings page: Configuration → Advanced Configuration → Wireless Dial →
Allowlist.
2. Check Enable SMS Alarm.
3. Click in the allowlist.
1) Input the mobile phone number to receive alarm message.
2) Check Reboot via SMS.
3) Select the certain events, and the mobile phone can receive the alarm message when the
event happens.
4) Click Save.
5) Optional: Repeat the steps above to set multiple recipients.
Modify the allowlist parameters.
Delete the allowlist that already set.
Send Test SMS
Send a message to the mobile phone for test.
4. Click Save.
7.9 Wi-Fi
Connect the device to wireless network by setting Wi-Fi parameters.
Note
This function is only supported by certain device models.
7.9.1 Connect Wi-Fi Manually
Before You Start
Refer to the user manual of wireless router or AP to set SSID, key, and other parameters.
Loading ...
Loading ...
Loading ...