AGA AEL481INABBLK User Guide

Loading ...

INSTALLATION

Check the appliance is electrically safe when you have nished.

3-Wire Conduit Installation

Disconnect the supplied power cord from the terminal block

and ground post. Keep the terminal block parts; you will need

them. Remove the strain relief clamp from the power cord

and remove the power cord and strain relief clamp from the

mounting bracket.

The range is shipped with reducer plates to give a 1 1/8’’

diameter opening for conduit connection (Fig. 11.5). Find the

reducer plates (Fig. 11.6) in the instruction pack and t them

to the mounting bracket.

Fit a squeeze connector (not supplied with the range), to your

conduit. Insert the conduit through the reducer plates on the

mounting bracket. Allow enough slack to easily attach the

wires to the terminal block.

NOTE: Do not install the conduit without a squeeze

connector.

A Ground strap is supplied in the conversion pack (Fig. 11.7).

Fit the Ground strap to the ground and center terminal of the

connector block.

The neutral or ground wire of the power cord must be

connected to the neutral terminal located in the center of the

connector block. The power leads must be connected to the

outside terminals (Fig. 11.8).

NOTE: Make sure the wires are completely inserted into

the terminals and secure connections are made.

Secure the squeeze connector in place in the bracket by

tightening the squeeze connector screws.

Ret the electrical connection cover.

Black

Red

White: Neutral

Ground strap

Fig. 11.5

ArtNo.020-0012 Reducer Plates USA

Fig. 11.6

Fig. 11.7

Fig. 11.8

Loading ...

AGA AEL481INABBLK 48 Inch Freestanding Induction Range with 5 Elements, Triple Oven, 6 cu. ft.