Loading ...
Loading ...
Loading ...
20
20
Changing Baffle Filters
PROFESSIONAL SERIES BAFFLE FILTER CHANGE
Covering Models 696, 697, and KECOM.
Professional series hoods are equipped with 2 removable dishwasher safe baffle
channels that the baffle filters rest in. To install the channels, place inside the hood,
right under the front and back edges of the hood. The channel is kept in place by
installation pieces on the sides and back of the baffle channel. Figure 1
NOTE: Never work on or clean the range hood while power is ON. Always unplug
the unit or switch the electrical breaker to the off position.
NOTE: The baffle channels may already be in place. See Figure 1 for positioning.
To install filters, first install the removable baffle channel. Next, take the filter and put
one end into the permanent baffle channel. Push back into place and pull down,
sliding the bottom of the filter in. Position filters so that they rest on both lips of the
baffle channels. The edges of the baffle filters should have open slats on the outside
edges. Figure 2
Figure 1 Figure 2
WARNING
WARNING: Edges on the baffle filters and baffle channels may be
sharp- please use caution when installing and removing. Do not attempt to
disassemble baffle filters, as the process may result in injury.
CHANGING PARTS
Loading ...
Loading ...
Loading ...