Loading ...
Loading ...
Loading ...
7
1. Slide chimney pieces over the angle iron on the hood. Pull the electrical plug to
the top of the chimney sections. Figure 4
2. Lift the hood to attach the angle iron to the ceiling bracket. Use screws provided
to attach.
3. Make your electrical and ducting connections. Use solid ducting made of
galvanized steel wherever possible. Try and minimize the use of elbows. More
elbows and longer runs create higher static pressure. No more than two to three
elbows is allowed. The hood comes with a grounded three prong plug that can
be plugged into a 15 amp circuit in the ceiling. The cord is 36” long.
4. Slide top chimney piece up over the mounting bracket on the ceiling and secure
it in place with the provided screws. Figure 5
5. Install stainless steel baffle filters. Before installing baffle filters, make sure that
you insert the grease cup under the motor blower.
Figure 4
Figure 5
1. Screw
2. Screw
Screw
7
Island Hood Installation
ISLAND HOOD INSTALLATION
Loading ...
Loading ...
Loading ...