Loading ...
Loading ...
Loading ...
User Manual of SADP Software
5
The IPv6 should be supported by the device.
The DHCP function should be supported by the device and the router that the device
connected with.
4. Enter the password of the admin account of the device in the Password field and
click Save to save the changes.
Task 2: Modifying Network Parameters of Multiple Devices
Steps:
1. Click and drag to select multiple devices to be modified in the device list.
2. In the Modify Network Parameters panel on the right side, edit the modifiable
network parameters, e.g. start IP address and port.
Example: If you select 3 devices for modification and set the start IP address as
10.16.1.21, then the IP addresses of the devices will be modified as 10.16.1.21,
10.16.1.22 and 10.16.1.23 in order.
3. Or you can check Enable DHCP in Batch checkbox to enable the DHCP function
for the selected devices. In this way, the IP Address, Subnet Mask, IPv4 Gateway,
IPv6 Address and IPv6 Gateway of the devices can be obtained automatically.
Loading ...
Loading ...
Loading ...