Loading ...
Loading ...
Loading ...
EN - 7
EN
• Position the lid (2) with the measuring cup
(1) onto the jug (3). Make sure the lid (2) is
screwed on tightly.
• To supply or remove voltage to/from the
appliance, connect the power cable on
the rear of the blender to a current outlet.
• Press the ON button. The button LEDs have
a xed light and the blender is ready for
use.
Electrocution hazard
Put the plug into a compliant
earthed outlet.
• Do not tamper with the earth.
• Do not use an adapter.
• Do not use an extension.
• Failure to comply with these
warnings can cause death, a
re or electrocution.
Stand-by mode
Stand-by mode is activated
automatically in the following
cases:
• after 30 seconds of complete
inactivity of the blender;
• if the blender is stopped manually
for more than 10 seconds;
• at the end of every pre-set
program.
The display shows the Stand-by
icon (21) and the button LEDs
are off.
• The display shows a ashing “0” by default.
• Select the desired speed using the control
knob (6) or a pre-set program by selecting
the relative button.
Do not operate at speeds 1-8 for
more than 3 minutes continuously.
Use
Additional ingredients can be
added during blending g by
removing the measuring cup (1)
and pouring ingredients through the
hole in the lid (2).
The appliance has a safety lock
system, which stops the motor when
the jug is removed. It also features a
motor protection device, which trips
if the motor is overloaded.
Smooth Start System
Gradual Start System
(Smooth Start)
On appliance start-up, the speed
progressively increases until the
set speed is reached. In this
way damage is prevented to the
appliance and improved blending
is obtained.
The Smooth Start function only
operates when a speed between
1 and 9 is selected and does not
operate with the PULSE mode or
the pre-set programs.
Loading ...
Loading ...
Loading ...