Loading ...
Loading ...
Loading ...
Cleaning and care of the oven
97
You can use the timer while the Self
Clean program is running. When the set
time has elapsed, the audible signal will
sound and will flash. The time will
then continue to increase on the
display. When you tap the Timersensor
button, the audible signal will stop and
the symbols on the display will go out.
Starting Self Clean at a later time
To start the Self Clean program later,
select Start at.
Confirm with OK.
Set the time at which you want the
Self Clean program to start.
Confirm with OK.
The door will lock automatically. Start at
and the start time set will appear on the
display.
You can reset the start time via Timer at
any point up to the starting time.
Once the start time has been reached,
the oven heating and cooling fan
functions will be automatically
activated. The remaining time will
appear on the display.
Finishing Self Clean
When the remaining time has elapsed, a
message will appear on the display to
tell you that the door is unlocking.
Ready will appear on the display and an
audible signal will sound as soon as the
door has been unlocked.
Confirm the message shown with OK.
Select Close.
Turn the oven off.
The audible signal will stop and the
symbols on the display will go out.
Risk of injury caused by hot
surfaces.
At the end of the Self Clean program,
the oven will still be very hot. You
could burn yourself on the heating
elements, oven compartment, or
accessories.
Allow the heating elements, oven
compartment, and accessories to
cool down before removing any Self
Clean residues or oiling the side
runners.
Clean the oven compartment and
accessories suitable for the Self
Clean program to remove any Self
Clean residues (e.g., ash) that can
build up depending on the degree of
soiling in the oven compartment.
Add a few drops of heat-resistant
cooking oil to some kitchen paper
and use this to lubricate the side
runners.
Loading ...
Loading ...
Loading ...