Loading ...
Loading ...
Loading ...
Make sure the device has power by inserting a new battery.
Press and hold the reset button for 5 seconds until the LED turns
red and then flashes in blue, indicate it enters pairing mode.
Follow the instructions of your Zigbee hub to pair the sensor.
Note: If not successfully paired to the Zigbee hub within 3 min, the
sensor will exit pairing mode. To enter pairing mode again, press
the reset button until the LED turns red and release. The LED turns
blue and flashes, indicating that it is in pairing mode.
Setup
1.
2.
03
Loading ...
Loading ...
Loading ...