1. INTRODUCTION
Strong stitching, a generous t and quality materials make this an ideal glove for general-purpose trade use. Conforms to BS EN
21420:2020 and 388:2016 Level 2242X.
2. SAFETY
9 Ensure the glove is suitable for the task at hand.
9 Before use, the glove shall be visually controlled. In case of deterioration the gloves must be scrapped (abrasion, cut, tear, puncture).
8 DO NOT wear these gloves when there is a risk of entanglement by moving parts of machines.
9 For multilayer gloves that can be separated, the performance levels are only applicable to the whole glove, including all layers.
3. PERFORMANCE
Mechanical Hazard
EN 388
2242X
Abrasion Resistance 2
Blade Cut Resistance 2
Tear Resistance 4
Puncture Resistance 2
Cut Resistance X
4. INSTRUCTIONS FOR USE
4.1. Place glove over hand tting the thumb and ngers in the appropriate positions making sure the glove is tted comfortably to carry out
the task at hand.
4.2. Remove by pulling the glove upward from the ngers.
5. MAINTENANCE
8 DO NOT wash or tumble dry.
9 The packaging provided with the glove is suitable for transport.
9 Replace the gloves if worn or damaged.
SSP12.V4 SSP12/6 SSP13.V4 SSP13/6 SSP14HV SSP14HV/6 Issue 1 23/11/23
Original Language Version
© Jack Sealey Limited
This document has been drawn up according to Regulation (EU) 2016/425 as amended to apply to GB for Personal Protective
Equipment. The declaration of conformity can be accessed at www.sealey.co.uk.
RIGGER’S GLOVES - PAIR
MODEL NO: SSP12.V4 SSP12/6 SSP13.V4 SSP13/6 SSP14HV
SSP14HV/6
Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR
01284 757500 sales@sealey.co.uk www.sealey.co.uk
ENVIRONMENT PROTECTION
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be
sorted, taken to a recycling centre and disposed of in a manner which is compatible with the environment. When
the product becomes completely unserviceable and requires disposal, drain any uids (if applicable) into approved
containers and dispose of the product and uids according to local regulations.
REFER TO INSTRUCTIONS
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS.
USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE
AND/OR PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions,
and properly maintained, give you years of trouble free performance.
The numbers indicate the performance level of the glove.
1 = lowest 4 = highest 5 highest for blade cut resistance.
‘X’ indicates that the glove has not been submitted to the
test or the test method appears not to be suitable for the
glove design or material.
Note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior
notice. Please note that other versions of this product are available. If you require documentation for alternative versions, please email or call
our technical team on technical@sealey.co.uk or 01284 757505.
Important: No Liability is accepted for incorrect use of this product.
Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim.
