We thank you for choosing our product. To ensure your safety and health, please use this equipment correctly. It is important to read this entire manual before assembling and using the equipment. Safe and effective use can only be achieved if the equipment is assembled, maintained, and used properly.
It is your responsibility to ensure that all users of the equipment are informed of all warnings and precautions.

PARTS LIST

Ordering Replacement Parts (U.S. and Canadian Customers only)
Please provide the following information in order for us to accurately identify the part(s) needed:
✓ The model number (found on cover of manual)
✓ The product name (found on cover of manual)
✓ The part number found on the “EXPLODED DIAGRAM” and “PARTS LIST” (found near the front of the manual)
SPECIFICATIONS

SPEED------------------------------------------0.0~999.9 MPH (Miles Per Hour)
TIME -------------------------------------------0:00~99:59 MIN (Minutes)
DIST (DISTANCE)---------------------------0.0~9999 ML (Miles)
CAL (CALORIES)----------------------------0.0~9999 KCAL (Kilocalories)
FUNCTION KEYS:
MODE: Press the red key repeatedly to select the desired value (TIME, SPEED, DISTANCE,CALORIES, SCAN). Hold the key for 4 seconds to have all function values reset (total reset).
FUNCTIONS:
SPEED: Displays current speed.
TIME: Displays the total time of the exercise from start to finish.
DIST (DISTANCE): Displays the distance of the exercise from start to finish.
CAL (CALORIES): Displays the total calories burned during an exercise from start to finish.
SCAN: Displays functions automatically in the following order: TIME, CALORIES and DISTANCE.
NOTE:
1. Please use 1pc of BUTTON CELL LR44 1.5V battery as a power supply. If there is an abnormal display on the meter, please replace the battery.
2. The meter will automatically power on when pedals are in motion or the MODE key is being pressed.
3. The meter will automatically start calculating when exercise begins.
4. All functions will automatically stop calculating with a “STOP” sign on the upper left corner of the meter when there is no movement for about 4 seconds; “STOP” sign will be off and the meter will automatically start calculating as soon as the machine is in motion.
5. The meter will automatically shut off if there is no movement for 4 to 5 minutes.
![]() | ADJUSTING THE TENSION Adjust the tension by rotating the Tension Control Knob (No. 9) clockwise to increase the level of resistance. Rotate the Tension Control Knob (No. 9) counter-clockwise to decrease the level of resistance. Tension levels are set at Level 1 being the lowest and Level 8 being the highest. |
![]() | WARNING The elliptical is intended to use in a sitting position only, do not stand on the elliptical. Failure to follow all warnings and instructions could result in serious injury or death. |
![]() | IMPORTANT NOTE: Please remove the plastic tab from the meter before use! |

The replacement is complete!
NOTE: Dispose battery according to your state and regional guidelines