Loading ...
Loading ...
Loading ...
Software Manual
98
■ Print Width
The print width should be set according to the size of paper used. The default (recommended print
width) is 72 mm.The standard default print width is 72 mm, which provides 4-mm margins on both
sides of 80-mm paper. The 51-mm print width setting is appropriate if you are using the optional 58-
mm paper supported by the TSP100 futurePRNT.
Notes:The print width is automatically changed to fit the paper width specified at addition of the
OPOS POS printer.
After changed automatically, do not adjust the print width manually.
■ Automatic Retry
If a printing error occurs while "Automatic Retry" is set to "Enable", the sent data is resent from the
beginning.
Retry processing is repeated up to five times.
Note:
1 If "Automatic Retry" is set to "Disabled", the ETB command is enabled in the application
side. However, check that the ETB is returned for one job before sending the next print
data. If print data is sent simultaneously from multiple PCs, the ETB will not be
guaranteed.
2 In the ESC/POS mode, the ETB command is not available even if "Automatic Retry" is
disabled.
3 The automatic retry function is not available for OPOS, JavaPOS, virtual serial port, and
virtual TCP/IP port.
■ Characters/Line (font A) <ESC/POS mode only>
42 char. (default): The standard for ESC/POS mode.
48 char.: The standard for Star Line mode.
Loading ...
Loading ...
Loading ...