Loading ...
Loading ...
Loading ...
6
2. Fitting the Front Handle
The front handle must be assembled before use: Make sure the lock spanner (10) is in the unlock posi-
tion. Unscrew the lock ring bolt (9) of front handle with a screw driver and pull it out. (Fig. 5 - 6)
3. Inserting or Removing Battery Pack
Hold battery pack with one hand and insert the battery pack to the chute, slide down the battery pack
as shown in Fig. 8. With a click the battery pack will be tted correctly. Make sure the lock/release but-
ton (5) for the battery pack is at the lock position and the battery pack must be felt engage.
Release the battery pack by pressing the lock/release button (5) with one hand and pull out the battery
pack with the other handle as shown in Fig. 9.
Attach the front handle to the main housing as illustrated in Fig. 7. Make sure the lock spanner (10) is at
the right side before attaching the front handle, otherwise the front handle can not be aligned with the
housing. (Fig. 7)
Check whether front handle is rmly secured, if not; re-tighten the lock ring bolt (9). Adjust the front han-
dle to the required position and close the lock spanner (10).
Fig. 5 Fig. 6
Fig. 7
Fig. 8 Fig. 9
Loading ...
Loading ...
Loading ...