Loading ...
Loading ...
Loading ...
5
Fig. 3 Fig. 4
Charging Procedure (Fig. 1,2,3,4)
Battery can be charged outside the machine (Fig.1) or on the machine (Fig 2-3). It is recommend-
ed to charge the battery pack outside the machine, If charge on the machine, switch will lose
function and machine can not be started during charging process.
1. Open the rubber cover to see charging inlet (16) on the battery pack. (Fig.4)
2. Insert the charger cable into charging inlet (16) . (Fig.3)
3. Making sure the wall outlet in your home is normal household voltage (AC230V, 50Hz); insert the battery
charger plug into the mains power supply.
4. The red LED charging indicator (18) on charger lights up to tell you that the battery pack is on change,
The battery is fully charged when the red LED charging indicator (18) is no longer lit but turns to be
green. Use the rubber cover to close the charging inlet (Fig. 4)
• During the charging process, the surface of battery pack will warm up, but this is perfectly normal.
• When not using the tool for extended periods, disconnect the battery charger from the socket.
• Only change the battery between 10˚ - 45˚C
• After prolonged use, allow battery to cool down first before recharging.
For your safety
Remove battery before any adjusting or cleaning and before leaving the machine unattended
for any period.
The blade continues to rotate for a few seconds after the cordless trimmer is switched off. Do
not touch the rotating blade.
Ensure that the cordless trimmer is assembled in the follwing order:
1. Fitting the Hand Guard
Insert the guard into the slot as illustrated in Fig. 5, making sure it is securely attached. Use two screws to
x the guard securely. (Fig. 5)
ASSEMBLY
Do not insert the battery until the hedge trimmer is completely assembled.
Fig. 5
Loading ...
Loading ...
Loading ...