DS-2CD2T43G0-I5/I8 User Manual

Loading ...

Add the device in client applicaon. Select IP/Domain, and input IP address and other

parameters to access the device.

2.7.9 Wi-Fi

Connect the device to wireless network by seng Wi-Fi parameters.

Note

This funcon is only supported by certain device models.

Connect Device to Wi-Fi

Before You Start

Refer to the user manual of wireless router or AP to set SSID, key, and other parameters.

Steps

Go to TCP/IP sengs page: Conguraon → Network → Basic Conguraon → TCP/IP .

Select Wlan to set the parameters. Refer to TCP/IP for detailed conguraon.

Note

For stable use of Wi-Fi, it is not recommended to use DHCP.

Go to Wi-Fi sengs page: Conguraon → Network → Advanced Conguraon → Wi-Fi .

Set and save the parameters.

1) Click Search.

2) Select a SSID, which should be the same as that of wireless router or AP.

The parameters of the network is automacally shown in Wi-Fi.

3) Select the Network Mode as Manage.

4) Input the key to connect the wireless network. The key should be that of the wireless network

connecon you set on the router.

What to do next

Go to TCP/IP sengs page: Conguraon → Network → Basic Conguraon → TCP/IP , and click

Wlan to check the IPv4 Address and log in the device.

2.7.10 Set Network Service

You can control the ON/OFF status of certain protocol as desired.

Steps

Note

This funcon varies according to dierent models.

Network Camera User Manual

Loading ...

Hikvision DS-2CD2T43G0-I5/I8 4 MP Outdoor WDR Fixed Bullet Network Camera