Vivotek FE9182-H ~ EOL Vivotek FE9182-H User Manual

Loading ...

VIVOTEK

144 - User's Manual

If you enable adaptive recording on Camera A, only when an event is triggered on Camera A will the

server record the streaming data in full frame rate; otherwise, it will only request the I frame data during

normal monitoring, thus effectively save lots of bandwidths and storage.

The alarm trigger includes: motion detection and DI detection. Please refer to Event settings on page 119.

■ Pre-event recording and post-event recording

The Network Camera has a buffer area; it temporarily holds data up to a certain limit. Enter a number

to decide the duration of recording before and after a trigger is activated.

■ Priority: Select the relative importance of this recording (High, Normal, or Low). Recording with a higher

priority setting will be executed rst.

■ Channel # Stream #: Select a channel and a stream under it as the recording source.

► To enable adaptive recording, please also enable time shift caching stream and select a caching

stream on Media > Video > Stream settings. Please refer to page 76 for detailed instruction.

► To enable recording notication please congure Event settings rst. Please refer to page 119.

Time

Bandwidth

Activity Adaptive Streaming

for Dynamic Frame Rate Control

I frame ---> Full frame rate ---> I frame

Continuous recording

► To enable adaptive recording, please make sure

you’ve set up the triggering sources such as Motion

Detection, DI Device, or Manual Trigger.

► When there is no alarm trigger:

- JPEG mode: record 1 frame per second.

- H.265/H.264 mode: record the I frame only.

► When the Intra frame period has been set to larger

than >1s on Video settings page, the Intra frame

period will be forced into 1s when the adaptive

recording is activated.

NOTE:

■ Recording name: Enter a name for the recording setting.

■ Enable this recording: Select this option to enable video recording.

■ With adaptive recording:

Select this option will activate the frame rate control according to alarm trigger. The frame control

means that when there is a triggered alarm/event, the frame rate will raise up to the value you’ve set

on the Stream setting page. Please refer to page 76 for more information.

Loading ...

Vivotek FE9182-H ~ EOL FE9182-H 5MP Fisheye Camera