SR-108MR(110-120V/650W)
SR-108MR(110-120V/1000W)
INSTRUCTION MANUAL
Thank you for purchasing your SMARTSCAN inducon cooker by Sunpentown. Make full use of
your new inducon range. Please carefully read this manual and keep on hand for future
reference.
R
SMARTSCAN
R
l Please plug this cooktop in the correct 15-amp outlet.
l Do not share the outlet with other appliances and make sure
it is correctly plugged in.
l Do not touch the ceramic plate immediately aer cooking,
the plate may remain hot due to heat transferred from the
cookware.
l Do not insert any object in the inlet or outlet to prevent
electric shock.
l Do not damage the ceramic plate.
l If the ceramic plate is broken, please turn unit off and unplug from outlet
immediately.
IMPORTANT:
l If the electric cord is damaged, please contact our service technician for a
replacement.
l This appliance is equipped with overheat protecon feature.
l Those with a pacemaker should consult they physician before using this
item.
l If the cooktop surface is broken or cracked, do not use the product as it may
cause electric shock.
EMERGENCY PROCEDURES
If the cooktop is not working properly, please contact our service technician for
assistance. Do not disassemble the unit by yourself.
LIST OF SUITABLE / UNSUITABLE COOKWARE
7
IMPORTANT SAFEGUARDS
A. Read all instrucons.
B. Do not touch hot surfaces. Use handles or knobs.
C. To protect against electrical shock, do not immerse cord or appliance in
water or other liquid.
D. Close supervision is necessary when any appliance is used by or near
children.
E. Unplug from outlet when not in use and before cleaning. Allow to cool
before pung on or taking off parts.
F. Do not operate any appliance with a damaged cord or plug or aer the
appliance malfuncons or has been damaged in any manner. Return
appliance to the nearest authorized service facility for examinaon, repair
or adjustment.
G. The use of accessory aachments not recommended by the appliance
manufacturer may cause injuries.
H. Do not use outdoors.
I. Do not let cord hang over edge of table or counter, or touch hot surfaces.
J. Do not place on or near a hot gas or electric burner, or in a heated oven.
K. Extreme cauon must be used when moving an appliance containing hot
oil or other hot liquids.
L. Always aach plug to appliance first, then plug cord into the wall outlet. To
disconnect, turn any control to “off”, then removed plug from wall outlet.
M. Do not use appliance for other than intended use.
N. Save these instrucons.
1
Control Panel
3
Installaon
lThe cooktop can be surface-mounted into
the countertop.
lThe cooktop can be flush with the countertop
650W
POWER
1000W
SR-108MR
Display
Power (wa)
Indicators
Power (wa)
Switch Buon
Control Knob
ON/OFF Buon
Power Indicator
Temperature
Scale Indicators
Temperature
Scale Swith Buon
4.80"
2.64"
650W
SR-108MR
Display
Control Knob
ON/OFF Buon
Power Indicator
Temperature
Scale Indicators
Temperature
Scale Swith Buon
4.80"
2.64"
ATTENTION
l Always place cookware or other objects on the top plate gently as the ceramic plate may
crack under force.
l Please use suitable cookware, otherwise abnormal cooking or damage may occur.
l The self-protect circuit will protect the unit when power supply is unstable. The red
power light will be flashing and cooking will stop.
KEY POINTS BEFORE USING THE COOKTOP
6
During Use:
Do not place a sealed can on the cooktop.
It may explode.
Do not put heated oil in the pan while
cooking.
Do not place paper or cloth in between the
cooktop and cookware to preventover heang.
If the cooking oil is not enough or an empty
pan is le on the cooktop for too long, it will
damage the cookware.
Before Use:
Keep away from water source;the cooktop
will not work if the air inlet and the air outlet
are wet.
Please do not use this cooktop near
credit card,disc,watch or radio.
Place cooktop on flat surface,but keep away from
the wall or other arcles. for best results,leave
at least 4 inches from all sides.
When the air inlet or the air outlet is blocked,
the internal temperature of the cooktop rises and
may automacally shut off during cooking.
Keep away from gas range or coal oil
stove. If the surrounding temperature is
high,cooktop will stop heang.
INDEX
Page 1 – Important Safeguards
Page 2 – Index
Page 3 – Installaon of Control Box
Page 4 – Installaon of Inducon Burner/Range
Page 5 – How to Use
Page 6 – Key Points Before Using the Cooktop
Page 7 – List of Suitable & Unsuitable Cookware
Page 9 – Troubleshoong
Page 10 –Specificaons
2
4
INSTALLATION OF INDUCTION BURNER/RANGE
Install in Counter Top/Table.Unit: inch.
Please allow 4 inch ventilation each side.
5
HOW TO USE
1. Plug in power cord (120V / 60Hz) - unit will beep once. ON/OFF indicator light will
illuminate.
2. Place suitable cookware and add food contents.
3. Press ON/OFF buon.
4. Select 650W or 1000W by pressing the Power buon(1000W model only).
Note: This is the heang power used to reach your hold temperature. Unit default is
650W.
5. Press the C/F buon to switch temperature display from Celsius to Fahrenheit
(or vice versa), turn control knob to select the temperature.
6. When done, turn unit off by pressing ON/OFF buon.
20 Hold temperature sengs:
NOTE:
l Safety feature: if no cookware is placed, unit will shut off aer 2 minutes.
l To avoid temperature jump, please cook at least 1 quart of food/content.
l Actual temperature may vary slightly due to different variables,
such as: surrounding temperature, content and volume of food, and if using a lid,
etc.
l Use flat cookware and place in center of plate.
l When using cookware that is not flat or with an uneven boom, the set temperature
will be VERY different from the actual temperature.
l If content is thick/creamy, we suggest heang at 650W.
32 43
54
65 76 82 93 104
115
126
11
12
13
14
15
16
17
18 19 20
90 110 130 150 170 180 200 220 240 260
270 290 310 330 350 360 380 400 420 440
1
2
3 4
5
6
7
8 9 10
132 143
154
165 176 182 193 204 215 226
8
Maintaining the product
l Unplug the cord before any cleaning is done.
l To clean the ceramic plate, use a so sponge with dish detergent. Then
wipe clean with damp towel.
l Clean fan intake with vacuum whenever necessary.
DO NOT IMMERSE THE COOKTOP IN WATER TO SOAK. THIS
WILL DAMAGE THE COOKTOP.
TROUBLESHOOTING
9
Failure Analysis
ON/OFF
Flicker
Is the pan be placed on the induction
cooker? Or is it an induction compatible
pan?
Low Voltage Protection
E0
Check if the voltage is low
High Voltage Protection
E1
Check if the voltage is high
IGBT Sensor Open
Circuit or Short Circuit
E7
Check if the IGBT sensor or relevant circuit was
broken
IGBT Overheat
E3
Circuit board inner fan was broken or
the air inlet is blocked.
Error
Error Code
Empty Pan Protection
Coil Sensor Open
Circuit or Short Circuit
E5
Check if the coil temperature sensor cable was
broken, or the plug is unplug.
Circuit failure EC
Check the circuit board if the components
are damage.
SPECIFICATIONS
Warning: Changes or modificaons to this unit not expressly approved by the party
responsible for compliance could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a consumer
ISM equipment. These limits are designed to provide reasonable protecon against
harmful interference in a residenal installaon.This equipment generates, uses, and
can radiate radio frequency energy and, if not installed and used in accordance with the
instrucons, may cause harmful interference to radio communicaons. However, there
is no guarantee that interference will not occur in a parcular installaon.If this
equipment does cause harmful interference to radio or television recepon, which can
be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
lReorient or relocate the receiving antenna.
lIncrease the separaon between the equipment and receiver.
lConnect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
lConsult the dealer or an experienced radio TV technician for help.
This device complies with part 18 of the FCC rules.
Operaon is subject to the following two condions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that
may cause undesired operaon.
10
Model
Voltage
Consumpon
Dimension
SR-108MR
110-120V ~/ 60Hz
1000W
12.60” x 13.4” x 3.94” (H)
Net Weight
13.45 LBS
Cord Length
Protecon
Designs
4.4 feet
Overheat protecon. Automac hazard detecon. Circuit protecon sensor.
High voltage. 20A fuse. Small object heat prevenon. Thermostat. Pan
material detecon
Power Range
650W/1000W
Current
9A
650W
650W
6A
Your Guarantee
If this product is found to be faulty as a result of faulty materials or
workmanship within one year from date of purchase, it will be repaired
free of charge.
This guarantee is subject to the following terms:
lSunpentown must be nofied of the fault.
lProof of purchase must be presented to Sunpentown’s nominated representave
lThe warranty will be void if the product if modified, misused or repaired by an
unauthorized person.
l The warranty aer repair will not be extended beyond the original one-year
period.
lAll replacement parts will be new or recondioned.
lParts, which are replaced, become the property of Sunpentown.
lThe warranty applies for the use of the product in the USA only.
What is NOT COVERED:
lWarranty does not include freight charges.
lIncidental or consequenal damage caused by possible defects with this product.
lDamage to product caused by improper power supply voltage, accident,fire,
floods or acts of nature.
lFailure of product resulng from unauthorized modificaons to the product.
lImproper installaon or failure to perform the necessary maintenance.
SUNPENTOWN INTERNATIONAL INC.
14625 Clark Ave. City of Industry, CA 91745
Tel: 800-330-0388
service@sunpentown.com
www.sunpentown.com
This GUARANTEE is in addion to your Statutory Rights
Loading ...
Loading ...
Loading ...
