Loading ...
Loading ...
Loading ...
6
Total Control
HDA-130
Owner’s Manual
Connecting Speakers
The HDA-130 can be placed nearly anywhere and deliver power to a local zone.
To connect a speaker wire:
1. Connect the speaker wire to the positive (red) and negative (black) to the wire
terminals available on the speaker (be mindful of proper polarity).
Please refer to the manufacturer’s owner’s manual for specic instructions on
wiring the speaker.
2. Loosen the integrated slotted-style screws (turn counter-clockwise) and remove
the phoenix connector from the terminal block on the HDA-130.
3. Secure the speaker wire into the phoenix connector (using the integrated
slotted-styled screws), and reinsert it into the terminal block.
4. Using the integrated slotted-styled screws on the left and right sides of the
phoenix connector (image at the right),
secure the phoenix connector to the
terminal block.
Verify the polarity of the speakers
and the wires before returning the
phoenix connector into the terminal
block on the amplier.
Loading ...
Loading ...
Loading ...