Loading ...
Loading ...
Loading ...
3
Total Control
HDA-130
Owner’s Manual
Rear Panel Description
Below are the ports located at the rear of the HDA-130:
1. DC IN: Connect the supplied 48V DC adapter to this port to power the
HDA-130 amplier.
2. LAN: Full Duplex Gigabit LAN ONLY, for audio streaming and zone control
(Wi-Fi NOT supported, device must be hard-lined to the network).
This port is also used for PoE+/++.
3. Analog/Digital Inputs: Both of the following inputs can be used
simultaneously to provide two (2) HDA “high-denition” audio streams:
• Analog - With supplied 3.5 mm adapter.
• PCM Toslink (Optical)
Slotted-styled screws are used to
secure the speaker wire to the terminal
block/phoenix style connector.
4. Sub Out: Standard RCA connector, signal is left + right full range.
5. Speaker Output: Terminal block/phoenix style connector that can be congured
one of the following ways:
• Powered by External 48V DC Adapter (supplied): Output power of
the amplier is 2 x 30W RMS per channel @ 8Ω.
• Powered by PoE++ Adapter (not included): Output power of the
amplier is 2 x 30W RMS per channel @ 8Ω.
• Powered by PoE+ Adapter (not included): Output power of the
amplier is 2 x 15W RMS per channel @ 8Ω.
5
3
2
1
4
Loading ...
Loading ...
Loading ...