REMOTE CONTROLLER
INTRODUCTION & WARRANTY
Thank you for selecting and buying V-TAC product. V-TAC will serve you the best. Please read these instructions
carefully before starting the installation and keep this manual handy for future reference. If you have any
another query, please contact our dealer or local vendor from whom you have purchased the product. They are
trained and ready to serve you at the best. The warranty is valid for 2 years from the date of purchase. The
warranty does not apply to damage caused by incorrect installation or abnormal wear and tear. The company
gives no warranty against damage to any surface due to incorrect removal and installation of the product. The
products are suitable for 10-12 Hours Daily operation. Usage of product for 24 Hours a day would void the
warranty. This product is warranted for manufacturing defects only.
WARNING!
1. For Indoor use only
2. In the using of the remote, if the indicated lamp blinking quickly, pls change the battery in time. Pls don’t
use poor quality battery to avoid the leaking of battery liquid to damage the remote.
3. Pls don’t use the remote on the wide-range metal or strong electromagnetic wave area, otherwise, it will
badly affect the controlling distance.
Caution, risk of electric shock.
PRODUCT KEY DIAGRAM
This marking indicates that this
product should not be disposed
of with other household wastes.
2
YEARS
WARRANTY
*
Color ring
Brightness-
Brightness+
Zone ON
Zone OFF
Modes(Programs)
Speed-
Speed+
4×(un) Link Light
Indicator light
Master ON Master OFF
LINKING & UNLINKING
Remark: The light can be working after linking with the remote.
If the light not blink slowly, the linking failed, Pls switch off the light again, and follow the
above steps again.
Switch off the light,
after 10 seconds
switch on again
1 2 3
The light blink 3 times slowly
means the linking is done
successfully.
When the light on, short press
any zone of " " 3 times
within 3 seconds
Link/Unlink
button
B
+
G
R
Power
Supply
controller
B
+
G
R
Power
Supply
controller
LINKING INSTRUCTIONS
UNLINKING INSTRUCTIONS
If the light not blink quickly, the unlink failed, pls switch off the light again, and follow the above
steps to unlink again.
3
The light blinking 10 times
quickly, means the unlinking
successfully.
Switch off the light,
after 10 seconds
switch on again
1
When the light on, short press
" " 5 times within 3 seconds
2
Unlinking must be the same zone
with the Linking
Link/Unlink
button
B
+
G
R
Power
Supply
controller
B
+
G
R
Power
Supply
controller
You can add an endless numbers of lights to a zone on the 4 channel remote by linking the lights to dierent zones. This
way you are completely exible in creating dierent group combinations. Below you can see some grouping examples.
Grouping of several lights
Remark:
1. The user can re-programme freely as needed. One remote can control countless lamps or controllers, but one lamp or
controller can only be controlled by four remotes ( Max ).
2. Please check the battery installation and controller ( totally discharge the power ), when you programme after switching
o and switching on.
COMPATIBLE DEVICES
TECHNICAL DATA:
MODEL VT-2442
INPUT VOLTAGE
3V (AAAx 2PCS)
(BATTERY NOT INCLUDED)
TRANSMISSION
FREQUENCY
2.4GHz
TRANSMISSION
POWER
6dBm
STANDBY POWER
CONSUMPTION
20μA
DIMENSION 52.5x21x120mm
Thank you for selecting and buying V-TAC product. V-TAC will serve you the best. Please read these instructions
carefully before starting the installation and keep this manual handy for future reference. If you have any
2
RS
MULTI-LANGUAGE
MANUAL QR CODE
Please scan the QR code
to access the manual in
multiple languages.
IN CASE OF ANY QUERY/ISSUE WITH THE PRODUCT, PLEASE REACH OUT TO US AT: SUPPORT@V-TAC.EU
FOR MORE PRODUCTS RANGE, INQUIRY PLEASE CONTACT OUR DISTRIBUTOR OR NEAREST
DEALERS. V-TAC EUROPE LTD. BULGARIA, PLOVDIV 4000, BUL.L.KARAVELOW 9B
(SKU: 2912
VT-2432)
(NOT INCLUDED)
(SKU: 2913
VT-2434)
(NOT INCLUDED)
VT-2432
VT-2434
Compatible with the below devices (Not included; available to buy separately)
