Loading ...
Loading ...
Loading ...
4
1. PREPARE INSTALLATION
Plan where and how the ductwork will be installed. Access to the top of the hood is
preferred for connection of ductwork.
Install proper-sized ductwork, elbows and roof or wall cap for the type of blower you
are installing. If installing CPM1 power pack, use 8” round ductwork and if installing
CPM2 power pack, use 10” round ductwork. Use 2” metal foil duct tape to seal duct
joints.
We recommend to install the power pack at a minimum distance of 24” from an
electric range and at 30” from a gas range.
Distances over 30” are at the installer and users discretion.
Run 3-wire power supply cable to installation location. Its length should extend at least
4 feet below the bottom of the custom hood.
MODEL CPM1 (SINGLE BLOWER)
OR CPM2 (DUAL BLOWER) TYPICAL DUCTWORK
WARNING
!
When performing installation, servicing or cleaning the unit, it is recommended to wear safety glasses and gloves.
NOTE: Before proceeding to the installation, check the contents of the box. If items are missing or damaged, contact the manufacturer.
Make sure that the following items are included:
- Power Pack
- Accessories: • Baffle filters with handles: (3 for 30’’ and 36’’ widths models, 4 for 42’’ width model and 5 for 48’’ width model)
• 2 Shielded halogen lamps (120 V, 50 W, MR16 with GU10 base or PAR16 with GU10 base)
• 8” Round adapter/damper (included with single blower power packs)
• 10” Round in-line vertical damper (included with dual blower power pack)
• 10” Round adapter (included with dual blower power pack)
• Bag of parts including: 1 wire clamp, 2 wire connectors, 4 no. 8 x 3/8” screws, 9 no. 8 x 1/2” chrome plated screws,
10 no. 8-32 x 1/4” screws. If need be, discard extra screws.
Parts sold separately:
Ducts, elbows, wall and roof caps. Refer to page 3 for a complete list of venting options and model numbers.
NOTE: During installation, protect countertop and/or cooktop.
2. INSTALL DUCTWORK AND ELECTRICAL WIRING
24” minimum above
cooking surface
(30” for gas range)
Power pack
Roof cap
Wall
cap
HH0103A
8” round duct for CPM1 or
10” round duct for CPM2
8” round adapter & damper
for CPM1 or
10” round adapter for CPM2
8” round elbow for CPM1 or
10” round elbow for CPM2
10” in line vertical damper for CPM2
3. CUSTOM HOOD PREPARATION
WARNING
!
When building a custom hood, always follow all applicable construction codes and standards.
The custom hood must be constructed to fit the size and shape of the CPM1 or the
CPM2 power pack.
See chart and illustration for details.
POWER PACK
MODEL
TOTAL
WEIGHT
RANGE HOOD DIMENSIONS
A* B* C
CPM1 (30” WIDTH) 33 LB.19
5
⁄16”28
7
⁄16”4
7
⁄8”
CPM1 (36” WIDTH) 37 LB.19
5
⁄16”34
7
⁄16”4
7
⁄8”
CPM2 (36” WIDTH) 50 LB 22
9
⁄16”34
7
⁄16”5
7
⁄8”
CPM2 (42” WIDTH) 54 LB.22
9
⁄16”40
7
⁄16”5
7
⁄8”
CPM2 (48” WIDTH) 57 LB.22
9
⁄16”46
7
⁄16”5
7
⁄8”
A
B
C
7/8
”
4½”
HD0296A
C
L
12”
3”
REAR
FRONT
* Dimensions A and B include rivets head.
Loading ...
Loading ...
Loading ...