Loading ...
Loading ...
Loading ...
![](https://files.manualsfile.com/11133599-z545r/bg36.png)
MXAL47138—UN—16APR13
5. Inspect bearings (C) at top and bottom of frame. Replace worn or
damaged bearings.
NOTE: Inner race extends above the outer race.
MXAL47139—UN—16APR13
6. Remove nut (D) and pull bolt out of caster.
7. Remove wheel assembly (E).
MXAL47140—UN—16APR13
8. Remove shield (F) and bearing (G). Inspect shields, wheel, and
bearings for wear or damage. Replace worn or damaged parts.
MX101527—UN—22JUN20
9. Inspect bearing wear areas (H) and bolt holes (I) for wear or
damage. Replace if necessary.
Assembly
● Apply grease to the caster shaft and bolt.
● Assemble in the reverse order of disassembly.
● Tighten caster locknut and bolt to specication.
Specication
Caster Locknut—Torque. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47 N·m (35 lb·ft)
● Tighten ange bolt securing yoke to specication.
Specication
Flange Bolt—Torque. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47 N·m (35 lb·ft)
SB31882,00003FF-19-22JUN20
Removing and Installing Side Style Covers
1. Park machine safely. (See Parking Safely in the Safety section.)
2. Move each of the motion control levers inward.
3. Raise the seat and rotate forward.
MX101506—UN—11MAY20
ROPS Not Shown For Clarity
4. Remove three push retainers (A) from the left-hand style cover (C).
5. Remove fuel tank cap (B).
6. Lift the left-hand style cover (C) from the machine and immediately
install the fuel cap (B).
7. Remove three push retainers (A) from the right-hand style cover
(D).
8. Lift the right-hand style cover (D) from the machine.
Service Miscellaneous
54
Loading ...
Loading ...
Loading ...