Loading ...
Loading ...
Loading ...
5. Repeat rst and second test using left motion control lever.
MP47322,00F463C-19-19MAR13
Using Seat Belt
CAUTION: Avoid injury! Always wear seat belt when
operating machine with folding protective structure in
upright position. Do not jump from machine if machine tips.
If protective structure must be folded to operate in a low
clearance area, do NOT use seat belt. Raise protective
structure and use seat belt as soon as conditions permit.
MX101388—UN—03APR20
1. Sit on the operator seat.
2. Pull out seat belt buckle (A) and stretch across your lap in one
nonstop motion.
3. Insert seat belt buckle into latch (B) until it locks.
4. To release seat belt, press button (C) until buckle comes out of
latch.
SB31882,00003C8-19-03MAY20
Raising and Lowering the ROPS
CAUTION: Avoid injury! Always wear seat belt when
operating machine with the ROPS in the raised position. Do
not jump from machine if machine tips.
If the ROPS must be folded to operate in a low clearance
area, do NOT use seat belt. Raise the ROPS and use seat
belt as soon as conditions permit.
CAUTION: Avoid injury! Fingers and hands can be pinched
or crushed. Be aware of potential pinch points and keep
hands away.
Raising the ROPS
1. Park machine safely. (See Parking Safely in the Safety section.)
MX101473—UN—09JUL20
2. On either side of the ROPS, pull the handle (A) outward to release
the pin. Rotate the handle 90° to keep the pin disengaged.
3. On the opposite side, grab hold of the upper ROPS. With the other
hand, pull the handle (A) outward to release the pin. Rotate the
handle 90° to keep the pin disengaged.
MX101471—UN—09JUL20
4. Push the upper ROPS forward to the desired position.
NOTE: When returning the ROPS to the fully raised position, press the
ROPS forward slightly to compress the bumper (B) and get the
pin to latch in the raised position.
5. Rotate the handle (A) back to the locked position. Ensure that the
pin is fully engaged in the ROPS.
6. Repeat for the other side of the ROPS.
Lowering the ROPS to the Fully Lowered Position
For use in low clearance areas.
MX101408—UN—27APR20
A—Raised Position
B—Intermediate Position
C—Fully Lowered Position
1. Park machine safely. (See Parking Safely in the Safety section.)
Operating
22
Loading ...
Loading ...
Loading ...