Loading ...
Loading ...
Loading ...
10. Tighten the screws on the bubble of the dome
camera to finish the installation.
Figure 2-7 Finish Installation
2.2 Ceiling Mounting of Type II Camera
Steps:
1. Disassemble the bubble by anti-clockwise rotating
the camera.
Figure 2-8 Disassemble the Camera
2. Paste the drill template to the celling.
3. Drill screw holes and the cable hole (optional) on
the ceiling according to the supplied drill template.
Figure 2-9 The Drill Template
Note:
Drill the cable hole (hole A) when adopting the
ceiling outlet to route the cable.
4. Secure the adapter plate on the ceiling with four
PA4 × 25 screws.
Figure 2-10 Secure the Adapter Plate
Note:
The supplied screw package contains self-tapping
screws, and expansion bolts.
Loading ...
Loading ...
Loading ...