Loading ...
Loading ...
Loading ...
Figure 2-3 Secure the Back Box
5. Attach the camera to the back box and secure them
with supplied screws.
Figure 2-4 Attach the Camera
Note:
The supplied screw package contains self-tapping
screws, and expansion bolts.
For cement wall/ceiling, expansion bolts are
required to fix the camera. For wooden wall/ceiling,
self-tapping screws are required.
6. Route the cables through the cable hole, or the side
opening.
7. Connect the corresponding cables, such as power
cord, and video cable.
8. Power on the camera to check whether the image
on the monitor is gotten from the optimum angle. If
not, adjust the camera according to the figure below
to get an optimum angle.
Pan Position
0° to 355°
Tilt Position
0° to 75°
Rotation Position
0° to 355°
Figure 2-5 3-Axis Adjustment
9. Install the bubble back to the camera.
Figure 2-6 Install the Bubble Back
Loading ...
Loading ...
Loading ...