Smart Color Display Weather Station with Touch Keys
User Manual
Model No:208667
Package Contents:
1. Display Unit
2. Outdoor Sensor
3. USB Line
4. Instructions Manual
Getting started:
1. Inserting the batteries/connecting the USB line with a computer, HUB or power
bank.
2. Place 3xAAA batteries into the color weather station.
3. Place 2xAAA batteries into the wireless weather sensor.
4. Place or hang the sensor outdoors.
Installing or Replacing Batteries:
We recommend using high quality batteries for the best product performance.
Heavy duty or rechargeable batteries are not recommended. The outdoor sensor
requires lithium batteries in low temperature conditions. Cold temperatures can
cause alkaline batteries to function improperly.
Note: Do not mix old and new batteries. Do not mix alkaline, standard,
and/or rechargeable batteries.
Default settings
1.Default time: 12:00(US) 0:00(EU)
2. Default date: 01/01 (Year: 2020, date form: M/D[US],date form: D/M[EU])
3. Default week: WED(Language: ENG, 7 languages can be selected,[US])
MIT (Language: GER, 7 languages can be selected,[EU])
4. Weather forecast: Partly Sunny
5. Default temperature: °F(US)/ °C(EU)
6. Default alarm: AM 6:30, default snooze time: 5min.
The LCD display fully for 3 seconds when changing new battery or resetting, then
with a sound BI into the normal state, after testing temperature, receiving RF for
3 minutes.
Display / Keys Details:
There are totally 6 keys for the alarm clock, they are included: SET, CH, ALERT,
DOWN, UP, SNZ/LIGHT.
There are totally 6 keys for touching on this color weather station including SET,
CH, ALERT, DOWN, UP and the SNZ/LIGHT.
1. SET buttons:
a. Press and hold for 3 seconds during normal mode to enter setting mode.
b. Press SET button during normal mode to enter alarm mode.
2. CH button:
a. Press this button to select the channel.
c. In normal display mode, press and hold to search RF.
3. ALERT button
a. Press the ALERT button to enter alert mode, use UP or DOWN to open or close
alert.
b. Press and hold the ALERT button to enter alert setting.
4. DOWN button:
a. Press to decrease the setting value during setting.
b. Press and hold 2 seconds button for fast adjust during setting mode.
c. In normal display mode, press this button to display max/min temperature/hu-
midity.
d. Press and hold the “DOWN” button 2 seconds to clear the record of MAX/MIN
temperature and humidity when display shows MAX or MIN temperature and
humidity.
5. UP buttons:
a. Press to increase the setting value during setting.
b. Press and hold 2 seconds button for fast adjust during setting mode.
c. In normal display mode, press this button to display heat index/dew
point/moldy index/comfortable level.
6. SNZ/LIGHT button:
a. Press this button to open backlight for 10 seconds (without USB line).
b. Press to activate the snooze function when alarming.
c. Press this button to change the brightness of backlight (Only with USB line).
Manually Setting the Time, Date & Units:
Press and hold down the "SET" button for 2 seconds the 12/24 hour mode starts
to flash, use “UP” and “DOWN” buttons to set the correct 12/24 hour mode.
Press "SET" button to confirm your setting, the hour display starts to flash, use
“UP” or “DOWN” buttons to set the correct hour.
Press "SET" button to confirm your setting, the minute display starts to flash, use
“UP” or “DOWN” buttons to set the correct minute.
Press "SET" button to confirm your setting, the Month and Date icon display starts
to flash, use “UP” or “DOWN” buttons to set the date display on Month/Date
Press "SET" button to confirm your setting, the year display starts to flash, use
“UP” or “DOWN” buttons to set the correct year.
Press "SET" button to confirm your setting, the month display starts to flash, use
“UP” or “DOWN” buttons to set the correct month.
Press "SET" button to confirm your setting, the date display starts to flash, use
“UP” or “DOWN” buttons to set the correct date.
Press "SET" button to confirm your setting, the language start to flash, use “UP”
or “DOWN” buttons set the correct language. The language order is:
Features & Benefits:
DISPLAY UNIT & OUTDOOR SENSOR
1. Time display
2. Alarm and snooze icons
3. Outdoor sensor signal strength
4. Calendar
5. Icons weather forecast
6. Weekday
7. Moon phase
8. Heat index/Dew point
9. Channel external sensor
10. Outdoor comfortable level/moldy index
11.Outdoor temperature and humidity
12. Indoor temperature alert
13. Tendency indoor temperature
14. Indoor temperature max/min record
15. Indoor comfortable level/moldy index
16. Tendency indoor humidity
17. Display low battery indicator
18. Indoor temperature and humidity
19. SET button
20. CH button
21. ALERT button
22. DOWN button
23. UP button
24. Wall mount hole
25. SNZ/LIGHT button
26. Stand bracket
27.Battery Compartment 3xAAA (batteries not included)
28.External power supply socket
29.Outdoor sensor display
30. Wireless signal indicator(Flashes when data is being sent to the display unit)
31. Integrated hang hole
32. TX channel selector, select external sensor channel
33. Compartment 2xAAA batteries (batteries not included)
ENG, DAN, SPA,DUT, ITA, FRE,GER(US). GER, FRE, ITA, DUT, SPA, DAN, ENG
(EU).
Press "SET" button to confirm your setting, the temperature units start to
flash, use “UP” or “DOWN” buttons set the correct units.
Press "SET" button to confirm your setting and to end the setting procedures,
enter the normal mode.
NOTE: You will automatically exit settings mode if no buttons are pressed for
20 seconds. Enter settings mode again at any time by pressing and holding the
SET button for 2 seconds.
Under normal mode, press SET button to enter alarm mode.
Setting the Alarm:
a. Press SET button to enter alarm mode Under the normal mode, press SET
button to enter alarm mode. Press and hold the SET button for about 2
seconds to set the alarm time. The alarm hour will begin blinking on the
display where the clock time is usually shown.
b. To adjust the alarm hour, press the “UP” or “DOWN” buttons (press and hold
to fast adjust). When alarm hour is set to your satisfaction, press the SET
button to proceed to the alarm minute preference. Press the “UP” or “DOWN”
buttons (press and hold to fast adjust), press the SET button again to exit
alarm settings. When you setting the alarm, the alarm is default turn on.
c. To turn the alarm ON or OFF, press the SET button to enter alarm mode,
press the UP or DOWN button to ON or OFF the alarm. The “ ” symbol
should show next to the clock display when alarm is set to ON. Press the UP or
DOWN button again to turn off the alarm, when the alarm is set to OFF, the
“ ” symbol should not display.
d. When the alarm is in operation it will begin beeping with one short beep and
continue with many short beeps if the alarm rings longer than 20 seconds. You
can snooze the alarm for 5 minutes by pressing the SNZ/LIGHT button.
Indoor / outdoor temperature and humidity:
1. Indoor temperature 13.9°F ~ 122°F (-9.9°C ~ 50°C), display LL.L when
below 13.9°F (-9.9°C )and display HH.H when higher than 122°F(50°C).
2. Outdoor temperature -40°F ~ 155°F (-40°C ~ 70°C), display LL.L when
below -40°F (-40°C) and display HH.H when higher than 155°F(70°C).
3. Temperature resolution: 0.1°F(US)/°C(EU)
4. Indoor and outdoor humidity range: 20%-95%, display 20% when below
20% and display 95% when higher than 95%.
6. Humidity resolution: 1 %RH
7. When alarm ringing, temperature and humidity test will be stopped.
Accuracy Temperature Accuracy Range:
1. Temperature accuracy:
(-40°C ~ -20°C)：±4°C
(-20°C~0°C)：±2°C
(0°C~50°C):±1°C
Note: when the temperature in 122°F ~ 155°F(50°C~70°C) range, the
temperature is only for reference.
Humidity Accuracy Range:
+/- 5 % RH (@77°F(25°C) , 30%RH to 50%RH);
+/- 10 % RH (@77°F(25°C) , 20%RH to 29%RH, 51%RH to 95%RH)
Temperature Alert Set:
1. In standard mode, press “ALERT” to enter alert mode ,press and hold
“ALERT” to set temperature alert function, use “UP” or “DOWN” to open or
close temperature alert function.
2. In standard mode, press and hold “ALERT” to set temperature alert function.
3. Press “ALERT” to set and order is: outdoor temperature upper limit→
outdoor temperature lower limit→ outdoor humidity upper limit→ outdoor
humidity lower limit→ indoor temperature upper limit→ indoor temperature
lower limit→ indoor humidity upper limit→ indoor humidity lower limit→ exit.
4. In set, press “UP” to go ahead by once. Hold “UP” to go ahead at 8 steps
per second.
5. In set, press “DOWN” to back by once. Hold “DOWN” to go back at 8 steps
per second.
6. Press or no handling in 10s will exit.
Temperature Alert
1. Temperature and alert icon will flash when alert.
2. In temperature alert status, alert temperature icon will twinkle and
temperature will always display.
3. Temperature alarm sound:
a. Two BIs /second
b. Alarm 5s for every minute
c. Not stop alarm until meet stop conditions.
4. Alarm stop conditions：
a. Press any button to stop alarm but temperature and alert icon will
continuously flash.
b. When temperature go back into alert range.
c. Press “ALERT” to enter alert mode, use “UP” or “DOWN” to turn off the
temperature alert function.
Loading ...
