Loading ...
WATER
CONCENTRATE
MAINTENANCE
CLEANING THE HOSE STORAGE
CLEANING & DRYING GUIDE
TROUBLESHOOTING
Problem Solution
Inconsistent
spray or no
spray
Ensure there is cleaning solution In both of the solution tanks.
Make sure the CarpetXpert Tank is installed correctly.
Make sure the unit is plugged in and the power is on.
Low suction
or no suction
Make sure the dirty water tank is not overfilled and is installed correctly.
Check the clog access point underneath the unit and clear any debris trapped
inside at the end of the hose.
If a cleaning tool is attached, make sure it is connected correctly.
Remove any debris from the cleaning attachments.
Unit not
turning on
Make sure the unit is plugged in completely.
Try a dierent socket.
Ensure On/O button was pressed.
Liquid leaking
from unit
The dirty water tank may be overfilled.
Make sure the dirty water tank and the CarpetXpert Tank are both installed
correctly.
Make sure the float valve in the dirty water tank is not stuck.
Make sure the unit is on a stable, flat surface.
Solution tanks
leaking
Make sure the caps on the solution tanks are tightened full.
Make sure both tanks are installed correctly and the caps have clicked into
place.
NOTE: Clean unit after every use to avoid odours, bacteria, and mould.
THE SHARK GUARANTEE
When a consumer buys a product in the UK, they get the benefit of legal rights relating to the quality of the product (your
“legal rights”). You can enforce your legal rights against your retailer, including Shark if you bought your Shark appliance from
sharkclean.co.uk. However, at Shark we are so confident about the quality of our products that we give the owner an additional,
free parts and labour manufacturer’s guarantee of up to 3 years.
A household appliance like a Shark floorcare appliance constitutes a sizeable investment. Your new machine needs to work
properly for as long as possible. The guarantee it comes with is an important consideration - and reflects how much confidence
the manufacturer has in its product and manufacturing quality.
The manufacturer’s guarantee does not aect your legal rights.
How long are new Shark machines guaranteed for?
Our manufacturer’s guarantee lasts for one year from the date of purchase as standard, or for three years if you register your
purchase with us within 28 days. There is information on how to register below.
How do I register my Shark guarantee?
If you have purchased your Shark appliance directly from sharkclean.co.uk your guarantee is registered automatically. If you
bought it from anywhere else, you can register your guarantee online within 28 days of purchase.
• To register online, please visit www.sharkclean.co.uk/register-guarantee or scan the QR code in your instruction manual.
• Keep a note of the date you purchased the machine.
IMPORTANT:
• Keep your receipt if you bought your Shark floorcare appliance from anywhere except sharkclean.co.uk. You will need it to
claim under your guarantee.
• The free Shark guarantee only applies to Shark owners living permanently in the UK.
What are the benefits of registering my free Shark guarantee?
When you register your guarantee, you will get an extra two years of cover. We’ll also have your details to hand if we ever need to
get in touch. If you further agree to receive communications from us, you can also receive tips and advice on how to get the best
out of your Shark floorcare appliance and hear the latest news about new Shark technology and launches.
What is covered by the free Shark guarantee?
Repair or replacement (at Shark’s option) of your Shark machine, including all parts and labour.
What is not covered by the free Shark guarantee?
• Normal wear and tear.
• Accidental damage or faults caused by negligent use or care, misuse, neglect, careless operation or handling of the Shark
appliance which is not in accordance with the Shark Operating Manual supplied with your machine.
• Damage caused by use of the Shark appliance for anything other than normal domestic household purposes.
• Damage caused by use of parts not assembled or installed in accordance with the operating instructions.
• Damage caused by use of parts and accessories which are not Shark Genuine Components
• Faulty installation (except where installed by Shark).
• Repairs or alterations carried out by parties other than Shark or its agents.
How can I claim under the free Shark guarantee?
Contact our customer service helpline on 0800 862 0453. For service hours please visit our website under ‘Contact Us’. It’s free
to call, and you’ll be put straight through to a Shark representative. You’ll also find online support at https://support.sharkclean.
co.uk/. The Shark representative will go through some troubleshooting with you, and if we conclude that the item has failed, we
will send you a replacement part or a returns label to send the defective item back to us free of charge. When you have delivered
the defective product to us, we will send you a replacement.
Please remember that the item will need to be boxed when you return it to us, which can be any suitable box; it does not have to
be the original packaging.
Where can I buy genuine Shark spares and accessories?
Shark spares and accessories are developed by the same engineers who developed your Shark floorcare appliance. You’ll find a
full range of Shark spares, replacement parts and accessories for all Shark machines at www. sharkclean.co.uk. Please remember
that damage caused by the use of non-Shark spares may not be covered under your guarantee.
PX200UKSeries_IB_A3_MP_230608_Mv3
© 2023 SharkNinja Operating LLC.
SharkNinjaEurope Limited,3150 Century Way, Thorpe Park, Leeds, LS15 8ZB, UK.
0800 862 0453 sharkclean.co.uk
SharkNinja Germany GmbH, Rotfeder-Ring 9, 60327 Frankfurt am Main, Germany.
SHARK is a registered trademark In the United Kingdom of SharkNinja Operating LLC.
STAINSTRIKER is a pending trade-
mark application in the United Kingdom of SharkNinja Operating LLC.
Illustrations may dier from actual product.
TECHNICAL SPECIFICATIONS
PX200 Series: =220V - 240V, 60 Hz, 450W
RECORD THIS INFORMATION
Model Number: _____________________________________________________________
Date of Purchase: ___________________________________________________________
(Keep receipt)
Store of Purchase: ___________________________________________________________
CLEANING FORMULASTHREE (3) YEAR LIMITED WARRANTY
Shark Deep Clean Pro
Deep carpet cleaning
pro formula for removing
dirt & grime.
Shark OXY Multiplier
Tough stain eliminating
formula for those stubborn
stains & odours.
For information,
scan QR to view
HOW-TO VIDEOS.
4
1. Make sure the unit is turned off.
Remove the solution tank and fill tank
with water up to the water fill line.
1
3. Hold the crevice tool in a horizontal
position and turn ON the unit. Press
and hold the spray trigger for one
minute. Repeat the process as needed
to remove all dirt and debris from hose.
3
2. Securely attach the hose cleaning tool
to the crevice tool
2
1. Unplug the unit and place it near a sink,
toilet, or drain to empty the remaining
liquid from the attached Tool. Clean the
unit and all parts (See Maintenance and
Cleaning the Hose sections).
1
2
2. Clean the float valve and make sure it can
move freely. Remove the foam filter from
the unit whilst cleaning.
2. When cleaning is complete and all parts
have dried, reattach all the tools. Wrap
up the power cord, then store the hose
cleaning tool on the unit. Wrap the hose
around the base of the unit and store
the hand tool in its holder.
1. Detach the dirty water tank. keeping
the tank upright and set down on a level
surface. Push the handle all the way back
until it clicks, then lift off the lid.
3. Suitably pour away the dirty liquid from
the dirty water tank, tapping off any loose
debris. Clean off any other debris on the
hand tools, bristles, lid and float valve.
Rinse all parts thoroughly with soap and
water and allow to air-dry completely
before reinstalling.
5. To clear any clogged debris, remove the
connecting clip on the bottom of the unit.
Clear all debris, then close the door.
4. Detach the hand tool by pressing the
release button. Remove the cover from
the hand tool to clean the air path. Wash
the bristles on the hand tool thoroughly.
DRYING:
• When extracting the liquid, pass
over the cleaning area in a uniform
pattern, applying downward pressure
throughout.
• Angle the hand tool to engage the
suction vents parallel to the cleaning
surface for optimum suction.
• Continue to pass over the cleaning
area until liquid is no longer extracting
through the hand tool window.
CLEANING:
• When applying the cleaning solution, only
cover the stain at the beginning of the
cleaning process. Avoid oversaturating the
area, or continual spraying during cleaning.
• For older and tougher stains, allow between
5-20 minutes for the cleaning solution to
settle into the stain and get to work.
• For fresh stain cleaning, these can be cleaned
immediately after spraying.
• Always agitate the area thoroughly to break
up the stain. Brush in multiple directions for
best results.
• Always ensure to use the correct solution
dilution measures when setting up the unit
for cleaning.
To order refills of
Shark® Deep Clean
Pro and Shark
OxyMultiplier,
scan the QR code.
1
2
1
2
5
3