Loading ...
Loading ...
Loading ...
26
P/N YRM276/YRM476-INST-FUL Rev C
Setting Definitions
The Master PIN Code is used for programming and for feature
settings. It must be created prior to programming the lock.
The Master PIN code will also operate (unlock/lock) the lock.
Creation
required*
Automatic Re-lock Disabled
Settings Default Setting Definition
After a successful code entry or manual unlock with the key,
the lock will automatically re-lock after each unlock in an
effort to keep your home secure. This feature is optional, and
can be turned off. In the ON mode, the lock will automatically
re-lock after thirty (30) seconds.
Inside Indicator Light
Disabled (Off)
When the latch is retracted, activating the keypad will extend
the latch (during Automatic Re-lock duration or when
Automatic Re-lock is disabled). When One-Touch Re-lock is
not in use (disabled), any valid PIN Code will re-lock the lock.
One Touch Locking
Enabled
Privacy mode is disabled by default. Enable Privacy mode
by pressing the privacy button for 4 seconds to put the lock
in do-not-disturb mode (all pin codes are disabled).
Privacy Button
Disabled
Volume
Enabled (Low)
The volume setting for entry code verification is set to Low
(2) by default; otherwise it can be set to High (1) or Silent
(3) for quiet areas.
Language English
Choosing English (1), Spanish (2) or French (3) becomes
the (default) setting for the lock's voice prompts.
This feature is enabled by the Master Entry Code. When
enabled, it restricts all user (except Master) Entry Code access.
When attempting to enter a code while the lock is in Lockout
mode, the RED locked padlock will appear on the screen.
Lockout Mode Disabled
After five (5) unsuccessful attempts at entering a valid
entry code, the lock will shut down and not allow operation
for sixty (60) seconds.
Wrong Code Entry Limit
5 Times
The Lock will shutdown (flashing RED) for sixty (60) seconds
and not allow operation after the wrong code entry limit
(5 attempts) has been met.
Shutdown Time 60 Seconds
The built-in Door Position Sensor on your lock ensures that
the door is closed prior to locking. If this feature is enabled,
the door will ONLY electronically lock when the Door Position
Sensor detects the door is closed.
Door Position Sensor Disabled
*The Master Entry Code must be created prior to any other programming of the lock.
Located on the inside lock. Shows active status (Locked) of lock
and can be enabled or disabled in the Advanced Lock Settings
(Main Menu selection #3).
Master PIN Code
Loading ...
Loading ...
Loading ...