Loading ...
Loading ...
Loading ...
Figure 6-7 Set Rule
6.
Oponal: You can set the parameters of mulple areas by repeang the above steps.
7.
For the arming schedule sengs, refer to Set Arming Schedule . For the linkage method sengs,
refer to Linkage Method Sengs .
8.
Click Save.
6.2.8 Set Object Removal Detecon
It detects whether the objects are removed from the predened detecon region, such as the
exhibits on display. If it occurs, the device can take linkage acons and the sta can take measures
to reduce property loss.
Before You Start
For certain device models, you need to enable the smart event funcon on VCA Resource page
rst.
Steps
1.
Go to VCA → Smart Event → Object Removal Detecon . For certain device models, you should
go to Conguraon → Event → Smart Event → Object Removal Detecon .
2.
Check Enable.
3.
Select a region. For the detecon region sengs, refer to
Draw Area .
4.
Set the minimum size and the maximum size for the target to improve detecon accuracy. Only
targets whose size are between the maximum size and the minimum size trigger the detecon.
For the detail sengs, refer to Set Size Filter .
5.
Set the rule.
Network Camera User Manual
47
Loading ...
Loading ...
Loading ...