Loading ...
Loading ...
Loading ...
2.
Check Enable PIR Alarm.
3.
Refer to Set Arming Schedule for seng scheduled me. Refer to Linkage Method Sengs for
seng linkage method.
4.
Click Save.
6.1.4 Set Angle Deviaon Detecon
The device can detect the device angle changes on lng and rotang direcon, which can indicate
the relevant angle changes in installaon surface.
Steps
1.
Go to Conguraon → Event → Basic Event → Angle Deviaon Detecon .
2.
Check Enable.
3.
Click Set to set the current device angle as the reference angle (rotaon angle: 0° and lt angle:
0°).
The interface will display the angles informaon, such as real-rime angle, real-me angle
deviaon, and reference angle.
4.
Set alarm.
1) Check Real-Time Upload Deviaon Angle.
2) Set the uploading interval according to your need.
3) Set lt angle deviaon and rotaon angle deviaon.
4) Click Save.
5.
Set arming schedule. See Set Arming Schedule .
6.
Set linkage method. See Linkage Method Sengs .
7.
Click Save.
6.1.5 Set Excepon Alarm
Excepon such as network disconnecon can trigger the device to take corresponding acon.
Steps
1.
Go to Conguraon → Event → Basic Event → Excepon .
2.
Select Excepon Type.
HDD Full The HDD storage is full.
HDD Error Error occurs in HDD.
Network Disconnected The device is oine.
IP Address Conicted The IP address of current device is same as that of other device in
the network.
Illegal Login Incorrect user name or password is entered.
3.
Refer to
Linkage Method Sengs for seng linkage method.
4.
Click Save.
Network Camera User Manual
38
Loading ...
Loading ...
Loading ...