Loading ...
Loading ...
4
Enrollment
5
Installaon
Enroll the Peripheral Locally
Enroll the Peripheral with APP
1. In the APP, tap the "Enrollment Mode" buon on the control panel page to make the control panel enter the enroll-
ment status.
2. Push the power switch of the peripheral to on, and it will be automacally enrolled to the control panel.
1. In the APP, tap the icon "+"and scan the QR code on the peripheral or enter the serial No. (Last 5 digit) of the peripheral.
2. Push the power switch of the peripheral to on, and it will be automacally enrolled to the control panel.
1. Log in to the APP Store, download and install App.
2. Power on the security control panel.
3. Log in the APP and tap the icon "+" . Scan the QR code or input the control panel serial No. (Last 5 digit) to add the
control panel.
4. Enroll the peripheral locally, with OR code, or with serial No..
Note: for re-enrollment, you need to hold the tamper buon while powering the peripheral on simultaneously.
ON
OFF
-1 2V +
ON
OFF
2.Loosen the set screw at the boom of the sounder and remove the front panel.
Note: You can hang the front panel on the buckle.
1. Check signal strength and select installaon place
Enter the signal checking mode by operang on the control panel.
Signal indicator turns green for 3 s: Strong.
Signal indicator turns orange for 3 s: Medium.
Signal indicator turns red for 3 s: Weak.
Signal indicator flashes red for 3 s: Lost.
-The addional force shall be equal to three mes the weight of the equipment but not
less than 50N. The equipment and its associated mounng means shall remain secure
during the installaon. Aer the installaon, the equipment, including any associated
mounng plate, shall not be damaged.
-Install the device on the place with nonflammable surface, such as concrete wall.
!
3
Hangzhou Hikvision Digital Technology CO.,Ltd. No.555 Qianmo Road, Binjiang District, Hangzhou 310052, China
Loading ...
Loading ...