Loading ...
3
Power On
1.Loosen the set screw at the boom of the sounder and remove the front panel.
Note: You can hang the front panel on the buckle.
2. Open the water-proof cover.
3. Power the sounder on.
Baery Power
1. Install four CR123A baeries according to the
polarity mark.
Note: The baries are included by default.
2. Close the water-proof cover.
3. Push the power switch to ON.
12 VDC Power
1. Push the Cable Knock-Out away.
2. Wire the power cable.
3. Close the water-proof cover.
4. Push the power switch to ON.
Note: The 12 VDC power supply is non
EN compliant.
ON
OFF
-1 2V +
ON
OFF
-1 2V +
ON
OFF
-1 2V +
-12V+
CAUTION
RISK OF EXPLOSION IF BATTERY IS
REPLACED BY AN INCORRECT TYPE
DISPOSE OF USED BATTERIES
ACCORDING TO THE INSTRUCTIONS
CHEMICAL BURNING DANGER
DO NOT SWALLOW THE BATTERY
KEEP NEW AND USED BATTERIES
AWAY FROM THE CHILDREN
INSTALL THE BATTERIES ACCORDING
TO THE POLARITY MARK ON THE
BATTERY HOLDER. THE OPPOSITE
POLARITY MAY CAUSE DEVICE
DAMAGE
DO NOT REVERSE THE POLARITY OF
THE BATTERY
2
Hangzhou Hikvision Digital Technology CO.,Ltd. No.555 Qianmo Road, Binjiang District, Hangzhou 310052, China
Note: For power on again, push the power swith to ON at least 5 s aer power off.
Loading ...
Loading ...
Loading ...