Loading ...
Loading ...
Loading ...
BASS GIG
1. Full range XLR / 1/4˝ combo jack input will accept line input signal from any line
level device with a balanced output jack.
2. Full range parallel XLR thru / output jacks will send the signal from the full range
combo inputs to another device.
3. Amplier clip limit LED indicator. Lights up when the amplier is near clipping. An
occassional ickering is acceptable. If LED is lit continously adjust the level control
and reduce the output level of connected sources. Failure to do so may lead to
premature failure of your speaker.
4. Full range signal LED indicator. Indicates signal input from connected sources.
5. Protect mode LED indicator. Indicates when amplier has entered into protect
mode.
6. Power LED indicator.
7. Phase switch reverses polarity of subwoofer and is dependent on the placement of
the subwoofer relative to the speakers.
8. The level knob is used to regulate the output level of the subwoofer. It allows you to
set the balance between the speakers and subwoofers. The subwoofer crossover
knob allows you to set the crossover frequency.
9. High Pass Pre-Amp XLR outputs are used to send the incoming signal to a full
range active speaker or power amp.
10. Heat sensitive, variable speed auto turn on fan. Fan activates when temperature
reaches 131° farenheit. Speed is automatically adjusted as temperature increases
or decreases.
11. Variable voltage selector switch. Allows user to switch between 110v and 220v.
12. IEC AC power socket / user serviceable fuse compartment.
13. Power switch.
Loading ...
Loading ...
Loading ...