Summit ASDW1522T3 15 Inch Built-In and Freestanding Single Zone Wine Cooler with 18 Bottle Capacity, Right Hinge, Glass Door, With Lock, 5 Extension Wine Racks, Digital Control, LED Light, Compressor Cooling, CFC Free, Commercially Approved, CARB Com

User Manual - Page 19

For ASDW1522T3.

PDF File Manual, 28 pages, Read Online | Download pdf file

ASDW1522T3 photo
Loading ...
Loading ...
Loading ...
19
OPERATING YOUR APPLIANCE
It is recommended that you install the appliance in a place where the ambient temperature is
between 72º and 78ºF (23º to 26ºC). If the ambient temperature is above or below the
recommended temperatures, the performance of the unit may be affected. For example, placing your
unit in extremely cold or hot conditions may cause interior temperatures to fluctuate. The expected
temperature setting may not be reached.
Recommended Temperature Settings for Wine Cellars
Conservation
49 ~ 57ºF
10 ~ 14ºC
Red Wines
58 ~ 72ºF
15 ~ 22ºC
Dry/White Wines
48 ~ 57ºF
9 ~ 14ºC
Rosé Wines
49 ~ 51ºF
10 ~ 11ºC
Sparkling Wines
41 ~ 47ºF
5 ~ 8ºC
Control Panel for Wine Cellars with Single Zone
ON/OFF Power
To turn the appliance off, press and hold the key for 5 seconds until the temperature display goes
out. To turn the appliance on, press and hold the key for 1 second until the temperature display
lights up.
Light
To turn the interior light on/off, lightly touch and hold the key for 5 seconds. The interior light
indicator will light up or go out to confirm the selection. The interior light indicator is the dot at the
bottom right of the display.
UP +
Used to increase (warm) the set temperature by 1°C/1ºF.
DOWN -
Used to decrease (cool) the set temperature by 1°C/1ºF.
Light Indicator / Multi-key Function
The interior light indicator is the dot at the bottom right of the display. The interior light indicator will
light up in showcase mode.
The interior light indicator will flash when the multi-key function is selected. To perform the multi-key
function, lightly touch and hold the first key, then touch the rest key for at least 5 seconds and then
release all the keys.
Setting the Temperature Control
You can set the temperature by touching the UP and DOWN symbols. When you push the two
buttons at the same time, the LED readout will show the original temperature set previously.
(The temperature preset at the factory is 54°F or 12°C.)
The temperature you are setting will increase by one degree each time you touch the Up symbol,
Loading ...
Loading ...
Loading ...