Loading ...
Loading ...
Loading ...
14
Extension Cord
Because of potential safety hazards under certain conditions, it is strongly recommended that you do
not use an extension cord with this appliance. However, if you must use an extension cord it is
absolutely necessary that it be a UL/CUL-Listed, 3-wire grounding type appliance extension cord
having a grounding type plug and outlet and that the electrical rating of the cord be 115 volts and at
least 10 amperes.
Reversing the Door Swing of your Appliance
This unit has the capability of the door opening from either the left or right side. The unit is delivered
to you with the door opening from the left side. Should you desire to reverse the opening direction,
please follow the reversal instructions shown on the following page.
NOTE: All parts removed must be saved to allow the door swing to be reversed.
Models SWC007/ALWC15/SWC1535B
1. Remove the bottom hinge (2) by
unscrewing the four lock screws
(1). Be careful to hold the door
firmly after removing the screws.
(Fig. 1)
2. Gently pull down to remove the
door from the right top hinge and
place it on a padded surface to
avoid the risk of damage. Then
remove the right top hinge (4).
(Figs. 3 & 4)
3. Unscrew and transfer pins (3)
and (7) of the hinge plate to the
opposite side. (Fig. 2)
4. Pop out the cover caps on the
left side of the cabinet and use
them to cover the screw holes on
the right-hand side.
5. Screw the alternative left top hinge (6), included in the fittings, on the left hand side of the
cabinet. (Fig. 3)
6. Relocate the door to the designated position. Then screw the bottom hinge assembly on the
left designated position and tighten it after the door is leveled.
7. Remove the handle from the left side of the door and install it on the right side. (See
Installing the Stainless Steel Handle.)
Loading ...
Loading ...
Loading ...